SDS Management and Workplace Safety Articles

Types of Workplace Hazards Every Worker Should Know

A workplace hazard is anything at work that could hurt someone or make them ill. The main types of workplace hazards are safety, electrical, fire and explosion, physical, chemical, biological, ergonomic and psychosocial hazards.

Nov 04, 2026

Are SDS Authoring Services Worth It, or Is Software Smarter?

Buying SDS authoring software and hiring an SDS authoring service both end with your company signing off the SDS. What differs is who classifies the hazards, how fast a revision comes back and what each change and matching label costs.

Nov 04, 2026

OSHA's Focus Four Hazards in Construction and How to Avoid Them

OSHA's Focus Four hazards get their name because OSHA counts them as the top four causes of construction deaths: falls, struck-by, caught-in or -between, and electrocution. Every OSHA 10 and OSHA 30 construction class teaches them.

Nov 04, 2026

How Do You Manage Contractor Safety? A Step-by-Step Guide

Contractor safety management turns a phone call and a handshake into a repeatable process. Here are the six steps, the OSHA rules behind them and the records worth keeping.

Oct 26, 2026

What Is Management of Change (MOC) in Safety and What Happens When You Skip It?

Most workplace changes look too small to review, until one of them causes an incident. Management of change takes each change from the first request to a closed record, and a worked chemical-swap example shows every step.

Oct 22, 2026

What Is a Permit to Work? Types of Permits and How the Process Works

A permit to work stops a high-risk job from starting until the hazards are checked and the controls are in place. Here is how permits work, which types exist, what goes on the form and how a permit moves from request to close-out.

Oct 19, 2026

Ready to get started?

Schedule a demo today!

What Is Job Safety Analysis (JSA): A Simple Guide With Steps and an Example

A job safety analysis breaks a job into steps, finds the hazards in each step, and decides how to control them before the work starts. This guide covers the four steps, a filled-in example, and whether the law requires one.

Nov 09, 2026

Unsafe Acts vs Unsafe Conditions In Workplace Safety

An unsafe act is something a person does that raises the risk of harm. An unsafe condition is a hazard in the workplace, equipment or environment. Most accidents involve both.

Oct 22, 2026

What Is a 5x5 Risk Matrix? A Complete Beginner's Guide

A 5x5 risk matrix is a grid that scores a risk by rating how likely it is to happen and how bad it would be if it did, each on a scale of 1 to 5, then multiplying the two numbers together.

Oct 22, 2026

Hierarchy of Controls: The Pyramid, Examples, and How to Apply It

The hierarchy of controls explained: all levels, real examples, what OSHA and WHS require, and how to apply it to reduce workplace hazards.

Nov 13, 2026

Hazard Identification: Methods, Examples, and How It Works

Hazard identification explained: main hazard types, identification methods, a step-by-step guide, and how it differs from risk assessment.

Oct 22, 2026

Hazard vs Risk: The Distinction All Safety Teams Should Know

a hazard is anything with the potential to cause harm; a risk is the likelihood that harm actually happens, combined with how severe it would be. A hazard can remain in a workplace for years carrying almost no risk, as long as no one's exposed to it.

Nov 09, 2026

SDS Management and Workplace Safety Articles

Limited Quantity Label Rules Every US Shipper Should Check

Types of Workplace Hazards Every Worker Should Know

Are SDS Authoring Services Worth It, or Is Software Smarter?

OSHA's Focus Four Hazards in Construction and How to Avoid Them

How Do You Manage Contractor Safety? A Step-by-Step Guide

What Is Management of Change (MOC) in Safety and What Happens When You Skip It?

What Is a Permit to Work? Types of Permits and How the Process Works

Ready to get started?

What Is Job Safety Analysis (JSA): A Simple Guide With Steps and an Example

Unsafe Acts vs Unsafe Conditions In Workplace Safety

What Is a 5x5 Risk Matrix? A Complete Beginner's Guide

Hierarchy of Controls: The Pyramid, Examples, and How to Apply It

Hazard Identification: Methods, Examples, and How It Works

Hazard vs Risk: The Distinction All Safety Teams Should Know