Why construction needs its own training
Construction work changes from day to day, involves several employers on one site, and exposes workers to hazards that can kill in a single event: a fall from a roof, a trench collapse or contact with a power line. General workplace safety training doesn't cover these in enough depth.
OSHA's construction standards require employers to instruct each employee in recognizing and avoiding unsafe conditions and in the regulations that apply to their work (29 CFR 1926.21(b)(2)).
OSHA construction training requirements
Many 1926 standards add specific training duties:
- Fall protection: train each worker who might be exposed to fall hazards, and keep a written certification of the training (1926.503)
- Scaffolds: train workers who use, erect or dismantle scaffolds (1926.454)
- Ladders: train workers who use ladders and stairways (1926.1060)
- Excavations: a competent person must inspect excavations and protective systems (1926.651(k))
- Hazard communication: train workers on the chemicals they use, such as cement, solvents and adhesives (1926.59, which applies 1910.1200)
What about OSHA 10 and OSHA 30?
The OSHA Outreach Training Program offers 10-hour courses for workers and 30-hour courses for supervisors. Federal OSHA doesn't require them, but some states, cities and many contractors and clients do. They give a useful foundation, but they don't replace training on the specific hazards and equipment of your site.
Core topics for safety training in construction
The Fatal Four
Cover each of the leading causes of construction deaths with practical controls: guardrails and harnesses for falls, high-visibility clothing and exclusion zones for struck-by hazards, trench protection for caught-in hazards, and safe distances and GFCIs for electrical hazards.
Equipment
Train operators on each machine they use, and evaluate them in the field before they work alone.
PPE
Show workers how to choose, fit and inspect hard hats, eye protection, gloves, boots and fall protection.
Health hazards
Include silica dust, noise and chemical exposure, which cause long-term illness rather than immediate injury.
Emergencies
Cover first aid arrangements, the emergency number, the assembly point and how to rescue a worker suspended in a harness.
Making construction training work
- Train on site. Toolbox talks at the start of a shift work better than classroom sessions weeks earlier.
- Use the right language. OSHA expects training in a language and vocabulary workers understand.
- Check competence. Have workers demonstrate tasks, such as inspecting a harness, rather than relying on attendance alone.
- Record everything. Keep the date, topics, trainer and attendee signatures. Fall protection training must be certified in writing.
Supervisors need more
Foremen and supervisors need extra training. They plan the work, choose controls, run toolbox talks and often act as the competent person for scaffolds or excavations. Train them to spot hazards before work starts and to stop work when conditions change.
Training subcontractors
Each employer is responsible for training its own workers, but the controlling contractor should check that subcontractors' crews are trained before they start work.
Download the free construction safety training guide to plan your next training cycle. For site inspections, use it with the OSHA Construction Site Safety Checklist.





