Allgemeine Information
Version
1.01
Überarbeitet am
2025-12-12
Produktidentifikator
Chloramben
CAS-Nr.
133-90-4
REACH-Registrierungsnummer
-
· Verwendung des Stoffes / des Gemisches
Verwendung im Labor
1.2.2. Verwendungen, von denen abgeraten wird
Es liegen keine Informationen vor
Hersteller / Lieferant
LGC GmbH
NOTRUFNUMMERN:
+4930 30686700, 1-800-424-9300, +1 703-741-3877
Symbole im Sicherheitsdatenblatt
Unternehmensinformationen
Unternehmen
LGC GmbH
E-Mail-Addresse
info@lgc-germany.com
GHS-Informationen
Signalwort
Gefahr
Hazard Codes
Gefahrenhinweise (CLP)
H315, H319, H335, H350
Gefahrenhinweise
Code
Hinweis
H315
Causes skin irritation
Abschnitt 2
ABSCHNITT 2. MÖGLICHE GEFAHREN
Classification of the substance or mixture FLAMMABLE LIQUIDS - Category 3 EYE IRRITATION - Category 2A SKIN SENSITIZATION - Category 1B CARCINOGENICITY - Category 1B TOXIC TO REPRODUCTION - Category 2 Health Hazards Not Otherwise Classified - Category 1 This product contains TiO2 which has been classified as a GHS Carcinogen Category 2 based on its IARC 2B classification. For many products, TiO2 is utilized as a raw material in a liquid coating formulation. In this case, the TiO2 particles are bound in a matrix with no meaningful potential for human exposure to unbound particles of TiO2 when the product is applied with a brush or roller. Sanding the coating surface or mist from spray applications may be harmful depending on the duration and level of exposure and require the use of appropriate personal protective equipment and/or engineering controls (see Section 8)
Signalwort
Danger
Gefahrenhinweise
Flammable liquid and vapor. May cause an allergic skin reaction. Causes serious eye irritation. May cause cancer. Suspected of damaging fertility or the unborn child. Prolonged or repeated contact may dry skin and cause irritation.
Verhütung
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves, protective clothing and eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid breathing vapor. Wash thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace.
Antwort
IF exposed or concerned: Get medical advice or attention. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. If skin irritation or rash occurs Get medical advice or attention. IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice or attention.
Lagerung
Store locked up.
Entsorgung
Dispose of contents and container in accordance with all local, regional, national and international regulations.
Ergänzende Gefahrenhinweise
Repeated exposure to high vapor concentrations may cause irritation of the respiratory system and permanent brain and nervous system damage. Inhalation of vapor/aerosol concentrations above the recommended exposure limits causes headaches, drowsiness and nausea and may lead to unconsciousness or death. This product either contains formaldehyde or is capable of releasing formaldehyde above 0.5 ppm under certain conditions. Formaldehyde is a known cancer hazard, a skin sensitizer and a respiratory sensitizer. Avoid contact with skin and clothing. Wash thoroughly after handling. Emits toxic fumes when heated. Percentage of the mixture consisting of ingredient(s) of unknown acute toxicity: 22.3% (oral), 42% (dermal), 43.4% (inhalation)
2.1 Einstufung des Stoffs oder Gemischs
FLAMMABLE LIQUIDS - Category 3 substance or mixture EYE IRRITATION - Category 2A SKIN SENSITIZATION - Category 1B CARCINOGENICITY - Category 1B TOXIC TO REPRODUCTION - Category 2 Health Hazards Not Otherwise Classified - Category 1 This product contains TiO2 which has been classified as a GHS Carcinogen Category 2 based on its IARC 2B classification. For many products, TiO2 is utilized as a raw material in a liquid coating formulation. In this case, the TiO2 particles are bound in a matrix with no meaningful potential for human exposure to unbound particles of TiO2 when the product is applied with a brush or roller. Sanding the coating surface or mist from spray applications may be harmful depending on the duration and level of exposure and require the use of appropriate personal protective equipment and/or engineering controls (see Section 8). Section 2. Hazard identification