Nota: Ingredienti elencati nella lista delle sostanze chimiche soggette a restrizioni
CE/CAS
231-175-3/7440-66-6
Nome della sostanza chimica
Zinc ()
Concentrazione
≥75-≤90 ≥5.0-≤10 5%
CE/CAS
216-823-5/1675-54-3
Nome della sostanza chimica
2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bisoxirane
Concentrazione
5%
CE/CAS
215-535-7/1330-20-7
Nome della sostanza chimica
Xylene
Concentrazione
≥1.0 - ≤5.0
CE/CAS
215-222-5/1314-13-2
Nome della sostanza chimica
Zinc oxide; C.I. 77947
Concentrazione
<0.010 0.03%
CE/CAS
292-694-9/7439-92-1
Nome della sostanza chimica
Blei, massiv: [Partikeldurchmesser ≥ 1 mm]
Concentrazione
≥0.5%
Elencato in
CE/CAS
905-562-9/90989-38-1
Nome della sostanza chimica
Aromatic hydrocarbons, C8; Light oil redistillate, high boiling
Concentrazione
N/A
CE/CAS
231-100-4
Nome della sostanza chimica
Blei, massiv: [Partikeldurchmesser ≥ 1 mm]
Concentrazione
<0.010 0.03%
Informazioni generali
Version
13
Data di revisione:
2025-09-04
A. Nome del prodotto
SELEMIX SYSTEM 2K ZINC RICH EPOXY PRIMER
Usi identificati:
Applicazioni industriali
1.2.2. Usi sconsigliati
Prodotto non destinato, etichettato o confezionato per l’utilizzo da parte del consumatore
Numero di emergenza
(+39) 081.545.3333, (+39) 055.794.7819, (+39) 0382.24.444, (+39) 02.66.1010.29, (+39) 06.4997.8000, (+39) 06.305.4343, (+39) 06.6859.3726, +39 02 6404.1
Icone in SDS
Informazioni della società
società
PPG Industries Italia S.r.l
Informazioni GHS
Avvertenza
Attenzione
Hazard Codes
Dichiarazioni di pericolo (CLP)
H226, H315, H317, H319, H400, H410
Dichiarazioni di pericolo
Codice
Dichiarazioni
H226
Liquido e vapori infiammabili.
H315
Provoca irritazione cutanea.
H317
Può provocare una reazione allergica cutanea.
H319
Provoca grave irritazione oculare.
H400
Molto tossico per gli organismi acquatici.
H410
Molto tossico per gli organismi acquatici con effetti di lunga durata.
Sezione 2
SEZIONE 2: Identificazione dei pericoli
Ingrediente/i con tossicità acuta sconosciuta
35.9% (oral), 76.1% (dermal), 59.2% (inhalation) This product contains TiO2 which has been classified as a GHS Carcinogen Category 2 based on its IARC 2B classification. For many products, TiO2 is utilized as a raw material in a liquid coating formulation. In this case, the TiO2 particles are bound in a matrix with no meaningful potential for human exposure to unbound particles of TiO2 when the product is applied with a brush or roller. Sanding the coating surface or mist from spray applications may be harmful depending on the duration and level of exposure and require the use of appropriate personal protective equipment and/or engineering controls (see Section 8).
AVVERTENZA
Danger
Indicazioni di pericolo
Flammable liquid and vapor. Causes serious eye irritation. May cause drowsiness or dizziness. May cause cancer. May cause damage to organs through prolonged or repeated exposure.
Prevenzione
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves, protective clothing and eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use only outdoors or in a well-ventilated area. Do not breathe vapor. Wash thoroughly after handling.
Reazione
IF exposed or concerned Get medical advice or attention. IF INHALED Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor if you feel unwell. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice or attention.
Conservazione
Store locked up. Store in a well-ventilated place. Keep container tightly closed.
Smaltimento
Dispose of contents and container in accordance with all local, regional, national and international regulations.
Elementi dell'etichetta supplementari
Sanding and grinding dusts may be harmful if inhaled. Repeated exposure to high vapor concentrations may cause irritation of the respiratory system and permanent brain and nervous system damage. Inhalation of vapor/aerosol concentrations above the recommended exposure limits causes headaches, drowsiness and nausea and may lead to unconsciousness or death. This product either contains formaldehyde or is capable of releasing formaldehyde above 0.5 ppm under certain conditions. Formaldehyde is a known cancer hazard, a skin sensitizer and a respiratory sensitizer. Avoid contact with skin and clothing. Wash thoroughly after handling. Emits toxic fumes when heated.
2.3 Altri pericol
May form explosive peroxides. Hazardous reactions or instability may occur under certain conditions of storage or use. Prolonged or repeated contact may dry skin and cause irritation.
2.1 Classificazione della sostanza o miscela
EYE IRRITATION - Category 2A CARCINOGENICITY - Category 1B SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE) (Narcotic effects) - Category 3 SPECIFIC TARGET ORGAN TOXICITY (REPEATED EXPOSURE) - Category 2 Percentage of the mixture consisting of ingredient(s) of unknown acute toxicity: 35.9% (oral), 76.1% (dermal), 59.2% (inhalation) This product contains TiO2 which has been classified as a GHS Carcinogen Category 2 based on its IARC 2B classification. For many products, TiO2 is utilized as a raw material in a liquid coating formulation. In this case, the TiO2 particles are bound in a matrix with no meaningful potential for human exposure to unbound particles of TiO2 when the product is applied with a brush or roller. Sanding the coating surface or mist from spray applications may be harmful depending on the duration and level of exposure and require the use of appropriate personal protective equipment and/or engineering controls (see Section 8). Section 2. Hazards identification