Informazioni generali
Version
1
Data di revisione:
2025-09-22
A. Nome del prodotto
Stearic acid-glycidyl ester
Sostanza
C ₂₁H₄₀O₃
CAS n.
7460-84-6
Usi identificati:
Uso di laboratorio
1.2.2. Usi sconsigliati
Nessuna informazione disponibile
fornitore
LGC Standards S.r.l
Numero di emergenza
02-66101029, +390649978000, 06-3054343, 1-800-424-9300, +1 703-741-3877
Icone in SDS
Informazioni della società
società
LGC Standards S.r.l
indirizzo email
it@lgcstandards.com, sds-request@lgcstandards.com
Sezione 2
SEZIONE 2: Identificazione dei pericoli
Classification of the substance or mixture FLAMMABLE LIQUIDS - Category 3 SKIN SENSITIZATION - Category 1B CARCINOGENICITY - Category 1B TOXIC TO REPRODUCTION - Category 2 Health Hazards Not Otherwise Classified - Category 1 This product contains TiO2 which has been classified as a GHS Carcinogen Category 2 based on its IARC 2B classification. For many products, TiO2 is utilized as a raw material in a liquid coating formulation. In this case, the TiO2 particles are bound in a matrix with no meaningful potential for human exposure to unbound particles of TiO2 when the product is applied with a brush or roller. Sanding the coating surface or mist from spray applications may be harmful depending on the duration and level of exposure and require the use of appropriate personal protective equipment and/or engineering controls (see Section 8)
AVVERTENZA
Danger
Indicazioni di pericolo
Flammable liquid and vapor. May cause an allergic skin reaction. May cause cancer. Suspected of damaging fertility or the unborn child. Prolonged or repeated contact may dry skin and cause irritation.
Prevenzione
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves, protective clothing and eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid breathing vapor. Contaminated work clothing should not be allowed out of the workplace.
Reazione
IF exposed or concerned: Get medical advice or attention. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. If skin irritation or rash occurs: Get medical advice or attention.
Conservazione
Store locked up.
Smaltimento
Dispose of contents and container in accordance with all local, regional, national and international regulations.
Elementi dell'etichetta supplementari
Sanding and grinding dusts may be harmful if inhaled. Repeated exposure to high vapor concentrations may cause irritation of the respiratory system and permanent brain and nervous system damage. Inhalation of vapor/aerosol concentrations above the recommended exposure limits causes headaches, drowsiness and nausea and may lead to unconsciousness or death. This product either contains formaldehyde or is capable of releasing formaldehyde above 0.5 ppm under certain conditions. Formaldehyde is a known cancer hazard, a skin sensitizer and a respiratory sensitizer. Avoid contact with skin and clothing. Wash thoroughly after handling. Emits toxic fumes when heated. Percentage of the mixture consisting of ingredient(s) of unknown acute toxicity: 23.3% (oral), 48.6% (dermal), 47% (inhalation)
2.1 Classificazione della sostanza o miscela
FLAMMABLE LIQUIDS - Category 3 substance or mixture SKIN SENSITIZATION - Category 1B CARCINOGENICITY - Category 1B TOXIC TO REPRODUCTION - Category 2 Health Hazards Not Otherwise Classified - Category 1 This product contains TiO2 which has been classified as a GHS Carcinogen Category 2 based on its IARC 2B classification. For many products, TiO2 is utilized as a raw material in a liquid coating formulation. In this case, the TiO2 particles are bound in a matrix with no meaningful potential for human exposure to unbound particles of TiO2 when the product is applied with a brush or roller. Sanding the coating surface or mist from spray applications may be harmful depending on the duration and level of exposure and require the use of appropriate personal protective equipment and/or engineering controls (see Section 8). Section 2. Hazard identification