Li-Po Battery

YUNTONG Power Co., Ltd

Revision date : 2022-01-01

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
Health risk rating 1
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

1308-04-9

Name of the chemical

Cobalt oxide (Co2O3)

Concentration

N/A

Listed in

EC/CAS

24937-79-9

Name of the chemical

PVDF

Concentration

N/A

Listed in

EC/CAS

9003-07-0

Name of the chemical

polypropylene wax

Concentration

N/A

EC/CAS

9002-88-4

Name of the chemical

polyethylene wax

Concentration

N/A

EC/CAS

7440-50-8

Name of the chemical

Copper

Concentration

N/A

EC/CAS

7440-02-0

Name of the chemical

Nickel

Concentration

N/A

General Information

Revision date

2022-01-01

Product name

Li-Po Battery

1.2.1 Relevant identified uses

Consumable

Manufacturer Name

YUNTONG Power Co., Ltd

Icons in SDS

Company Information

company name

YUNTONG Power Co., Ltd

e-mail address of the competent person responsible for the Safety Data Sheet

info@yuntong-batt.com

Section 2

SECTION 2: Hazards identification

a. Lithium cobalt oxide:Bule-black powder(odorless),cobalt and cobalt compounds are considered to be possible human carcinogen(s).By IARC: May irritate eyes, skin, nose, throat and respiratory system and may cause allergic skin sensitization. b. Carbon:Black powder(odorless),no cases of carbon being harm to human have been reported. WHO and ILO have never verified that carbon irritation of the shin and mucous membrane, etc. Electric agent Black powder (Garlic-Like),Toxicity (Am. Conf. Of Gov. Ind. Hygienists ACGIH 2000 Edition) Simple Asphyxiant, Flammability limits in air (STP conditions) 2.4-83vol%(The upper limit could reach 100%) d. Bond: White powder(odorless),inhalation and skin contact are expected to be the primary routs of occupational exposure to this material. As a finished product, it is a synthetic, high molecular weight polymer. Due to its chemical and physical properties, this material does not require special handing other than the good industrial hygiene and safety practical employed with any industrial material of this type. Under normal processing conditions, this material release fume or vapor components of these release may vary with processing time and temperature. These processer release may produce eye, skin and/respiratory tract irritation and ,with repeated or prolonged exposures, nausea, drowsiness, headache and weakness. Although unlikely under normal handling conditions, if this materials is heated in excess of 600F(315°C),hazardous, decomposition products will be produced. Hazardous decomposition products include hydrogen fluoride and oxides of carbon, the concentrations of which vary with temperature and heating regimens. e. Electrolyte: Liquid(colorless),may cause moderate to severe irritation, burning, and dryness of the skin. May cause eye irritation or burning. Breathing of the mists, vapors or fumes may irritate the nose, throat and lungs or fumes may irritate the nose, throat and lungs. Exposure of material with areas which contain water may generate hydrofluoric acid which can cause immediate burns on shin, severe eye burns to the mouth and gastrointestinal tract if inhaled. Direct exposure to areas of the body needs to be treated immediately to prevent injury. Under normal conditions of use the battery is hermitically sealed article. The products referenced herein are exempt article and are not subject to OSHA’s Hazard Communication Standard requirements for preparation of material safety date sheets. This information is provided as a service to our customers.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.