Note: Ingredients listed on restricted chemical lists
EC/CAS
21645-51-2
Name of the chemical
Aluminium hydroxide
Concentration
N/A
EC/CAS
1309-42-8
Name of the chemical
Magnesium hydroxide
Concentration
N/A
EC/CAS
14807-96-6
Name of the chemical
Talc
Concentration
N/A
General Information
Product name
FIRE RETARDANT THERMOPLASTIC COMPOUNDS
1.2.1 Relevant identified uses
S-245(AN-245)、S-700、S-845、S-845C 、S-900、S-910、S-920M、S-920M+、
Manufacturer Name
Yung Chyang Chemical Industries Co., Ltd
Icons in SDS
Company Information
company name
Yung Chyang Chemical Industries Co., Ltd
Section 2
SECTION 2: Hazards identification
The material is not considered to be hazardous in the solid state. In the molten state, the typical precautions for handling hot, sticky, viscous melts must be observed. Skin Contact : Normally no effect. The material is inert in the solid state and can thus be handled using normal industrial hygiene. Wash hands with soap and water before taking food or toilet visits and at the end of shifts. Exposure to hot material may cause thermal burns. Fumes evolved during processing : Under normal process conditions, the amount of fume evolved is small. The fumes can be irritating but are non-toxic. However, gross overheating (>240°C) will cause decomposition and the evolution of irritant and harmful fumes of acetic acid and carbon monoxide. Good ventilation by local fume extraction is recommended in order to keep employee exposure as low as reasonably practical.