Note: Ingredients listed on restricted chemical lists
EC/CAS
7440-31-5
Name of the chemical
Organometallic tin
Concentration
N/A
EC/CAS
1317-36-8
Name of the chemical
Lead monoxide (lead oxide)
Concentration
N/A
EC/CAS
7440-39-3
Name of the chemical
Barium
Concentration
N/A
EC/CAS
1309-60-0
Name of the chemical
Lead peroxide
Concentration
N/A
EC/CAS
7439-92-1
Name of the chemical
Blei, massiv: [Partikeldurchmesser ≥ 1 mm]
Concentration
N/A
Listed in
EC/CAS
1309-64-4
Name of the chemical
Diantimontrioxid
Concentration
N/A
General Information
Revision date
2013-02-06
Product name
Valve Regulated Lead-Acid (VRLA) Industrial Battery
1.2.1 Relevant identified uses
Energy storage Photovoltaic energy systems (PVES); wind turbines
supplier name
Yuasa Battery Europe Ltd
Icons in SDS
Company Information
company name
Yuasa Battery Europe Ltd
e-mail address of the competent person responsible for the Safety Data Sheet
peter.hollingworth@yuasaeurope.com, christian.raynaud@yuasa.fr, joachim.heer@yuasa-battery.de, antonio@yuasaiberia.com, marco.filippi@yuasa.it, matt.jordan@yuasaeurope.com
Section 2
SECTION 2: Hazards identification
VRLA Battery Mechanical VRLA Batteries can be heavy. Correct manual handling techniques and/or mechanical lifting aides (e.g. Fork Lift Truck) must be used. Electrical VRLA Batteries can contain large amounts of electrical energy which can give very high discharge currents and severe electrical shock if the terminals are short circuited. Chemical The VRLA Battery presents no chemical hazards during the normal operation provided the recommendations for handling, storage, transport and usage are observed. VRLA Batteries emit hydrogen gas which is highly flammable and will form explosive mixtures in air from approx 4% to 76%. This can be ignited by a spark at any voltage, naked flames or other sources of ignition. If the battery is broken and the internal components exposed, hazards may exist which require careful attention. Plate Grids and Metallic lead, lead alloys and Lead inorganic compounds: Active materials Lead poisoning is usually caused by inhalation of minute particles of lead fume and dust, which are absorbed by the blood stream from the lungs and deposited in the bone marrow. Lead is only slowly released from the bones and thus has an accumulative effect causing chronic poisoning. TOXIC by ingestion or inhalation of dust, vapour or fume May cause harm to the unborn child Harmful by inhalation and if swallowed Danger of cumulative effects Battery Electrolyte Severe IRRITATION and DAMAGE to internal tissues if swallowed, IRRITATION of eyes and skin and may cause BURNS and DERMATITIS. Case Material Standard Grade, UL94 HB & Flame Retardant (FR) Grade, UL94 V0 No hazard in normal use. Material can burn in a fire with toxic smoke and decomposition products. Separator Material The fibres may cause IRRITATION to skin or eyes upon exposure, and to internal tissues if inhaled or swallowed