Cedarwood, Essential Oil 9506844896287

Hazard statements (CLP)

H304, H315, H410

Code

Statements

H304

May be fatal if swallowed and enters airways

SECTION 2: Hazards identification

Signal word

Danger

Hazard statements

H304, May be fatal if swallowed and enters airways. H315, Causes skin irritation. H410, Very toxic to aquatic life with long lasting effects. M factor None

Additional information

None

Precautionary statements

P264, Wash hands and other contacted skin thoroughly after handling. P273, Avoid release to the environment. P280, Wear protective gloves/eye protection/face protection. P301/310, IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician. P302/352, IF ON SKIN: Wash with plenty of soap and water. P331, Do not induce vomiting. P332/313, If skin irritation occurs: Get medical advice/attention. P362, Take off contaminated clothing and wash before reuse. P391, Collect spillage. P405, Store locked up. P501, Dispose of contents/container to approved disposal site, in accordance with local regulations.

Other hazards

Hydrocarbon Concentration %: 47.1000%

2.1 Classification of the substance or mixture

Classification under Regulation (EC) No 1272/2008 Class and category of Skin Corrosion / Irritation Category 2 danger: Aspiration Hazard Category 1 Hazardous to the Aquatic Environment - Acute Hazard Category 1 Hazardous to the Aquatic Environment - Long-term Hazard Category 1 H304, May be fatal if swallowed and enters airways. H315, Causes skin irritation. H410, Very toxic to aquatic life with long lasting effects. 2.2 Label elements Classification under Regulation (EC) No 1272/2008 Signal word: Danger Hazard statements: H304, May be fatal if swallowed and enters airways. 1 H315, Causes skin irritation. H410, Very toxic to aquatic life with long lasting effects. M factor: None Supplemental None Information: Precautionary P264, Wash hands and other contacted skin thoroughly after handling. statements: P273, Avoid release to the environment. P280, Wear protective gloves/eye protection/face protection. P301/310, IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician. P302/352, IF ON SKIN: Wash with plenty of soap and water. P331, Do not induce vomiting. P332/313, If skin irritation occurs: Get medical advice/attention. P362, Take off contaminated clothing and wash before reuse. P391, Collect spillage. P405, Store locked up. P501, Dispose of contents/container to approved disposal site, in accordance with local regulations. Pictograms: 2.3 Other hazards Other hazards: Hydrocarbon Concentration %: 47.1000% Section 3. Composition / information on ingredients 3.1 Substances Product identifier: Cedarwood, Essential Oil; CAS: 85085-29-6 Contains: Name Specific Conc. CAS EC REACH Registration % Classification for Limits, M-factors No. (CLP) 1272/2008 and ATEs Skin Irrit. 2-Asp. Tox 1- alpha-Cedrene 469-61-4 207-418-4 20-<50% Aquatic Acute 1- M = 10-M = 10 Aquatic Chronic 1; H304-H315-H410,- Cedrol 77-53-2 201-035-6 10-<20% Aquatic Chronic 2; H411,- 1 Skin Irrit. 2-Aquatic beta-Cedrene 546-28-1 5-<10% Acute 1-Aquatic M = 10-M = 10 Chronic 1;H315-H410,- Skin Irrit. 2-Eye Irrit. 2- beta-Guaiene 88-84-6 201-860-1 1-<5% Asp. Tox 1;H304-H315- H319,- Acute Tox. 4-Skin Irrit. 2-Skin Sens. 1B-Asp. inhalation: ATE = 1.5 l-.β.-Bisabolene 495-61-4 0.1-<1% Tox 1-Aquatic Chronic mg/l (dusts or mists) 2;H304-H315-H317- H332-H411,- Section 4. First-aid measures 4.1 Description of first aid measures Inhalation: Remove from exposure site to fresh air, keep at rest, and obtain medical attention. Eye exposure: Flush immediately with water for at least 15 minutes. Contact physician if symptoms persist. Skin exposure: IF ON SKIN: Wash with plenty of soap and water. Ingestion: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician. 4.2 Most important symptoms and effects, both acute and delayed May be fatal if swallowed and enters airways. Causes skin irritation. 4.3 Indication of any immediate medical attention and special treatment needed None expected, see Section 4.1 for further information. Section 5: Firefighting measures 5.1 Extinguishing media Suitable media: Carbon dioxide, Dry chemical, Foam. 5.2 Special hazards arising from the substance or mixture In case of fire, may be liberated: Carbon monoxide, Unidentified organic compounds. 5.3 Advice for fire fighters: In case of insufficient ventilation, wear suitable respiratory equipment. Section 6. Accidental release measures 6.1 Personal precautions, protective equipment and emergency procedures: Avoid inhalation. Avoid contact with skin and eyes. See protective measures under Section 7 and 8. 1 6.2 Environmental precautions: Keep away from drains, surface and ground water, and soil. 6.3 Methods and material for containment and cleaning up: Remove ignition sources. Provide adequate ventilation. Avoid excessive inhalation of vapours. Contain spillage immediately by use of sand or inert powder. Dispose of according to local regulations. 6.4 Reference to other sections: Also refer to sections 8 and 13. Section 7. Handling and storage 7.1 Precautions for safe handling: Keep away from heat, sparks, open flames and hot surfaces. - No smoking. Use personal protective equipment as required. Use in accordance with good manufacturing and industrial hygiene practices. Use in areas with adequate ventilation Do not eat, drink or smoke when using this product. 7.2 Conditions for safe storage, including any incompatibilities: Store in a well-ventilated place. Keep container tightly closed. Keep cool. Ground/bond container and receiving equipment. Use explosion-proof electrical, ventilating and lighting equipment. Use only non-sparking tools. Take precautionary measures against static discharge. 7.3 Specific end use(s): Fragrances,Cosmetics: Use in accordance with good manufacturing and industrial hygiene practices. Section 8. Exposure controls/personal protection 8.1 Control parameters Workplace exposure limits: Not Applicable 8.2 Exposure Controls Eye / Skin Protection Wear protective gloves/eye protection/face protection Respiratory Protection Under normal conditions of use and where adequate ventilation is available to prevent build up of excessive vapour, this material should not require special engineering controls. However, in conditions of high or prolonged use, or high temperature or other conditions which increase exposure, the following engineering controls can be used to minimise exposure to personnel: a) Increase ventilation of the area with local exhaust ventilation. b) Personnel can use an approved, appropriately fitted respirator with organic vapour cartridge or canisters and particulate filters. c) Use closed systems for transferring and processing this material. Also refer to Sections 2 and 7. 1 Section 9. Physical and chemical properties 9.1 Information on basic physical and chemical properties Physical State/Colour: Liquid, colourless to pale yellow Odour: Characteristic Odour threshold: Not determined Melting point / freezing point: Not determined Boiling point or initial boiling point and boiling Not determined range: Flammability: Not determined Lower and upper explosion limit: Not determined Flash point: > 93 °C Auto-ignition temperature: Not determined Decomposition temperature: Not relevant pH: Not determined Kinematic viscosity: Not determined Solubility: Not determined Partition coefficient: n-octanol/water (log Not determined value): Vapour pressure: Not determined Density and/or relative density: 0.9350 - 0.9700 Relative vapour density: Not determined Particle characteristics: Not determined 9.2 Other information: None available Section 10. Stability and reactivity 10.1 Reactivity: Presents no significant reactivity hazard, by itself or in contact with water. 10.2 Chemical stability: Good stability under normal storage conditions. 10.3 Possibility of hazardous reactions: Not expected under normal conditions of use. 10.4 Conditions to avoid: Avoid extreme heat. 10.5 Incompatible materials: Avoid contact with strong acids, alkalis or oxidising agents. 1 10.6 Hazardous decomposition products: Not expected. Section 11. Toxicological information 11.1 Information on hazard classes as defined in Regulation (EC) No 1272/2008 Acute Toxicity: Based on available data the classification criteria are not met. Acute Toxicity Oral Not Applicable Acute Toxicity Dermal Not Applicable Acute Toxicity Inhalation Not Available Skin corrosion/irritation: Skin Corrosion / Irritation Category 2 Serious eye damage/irritation: Based on available data the classification criteria are not met. Respiratory or skin sensitisation: Based on available data the classification criteria are not met. Germ cell mutagenicity: Based on available data the classification criteria are not met. Carcinogenicity: Based on available data the classification criteria are not met. Reproductive toxicity: Based on available data the classification criteria are not met. STOT-single exposure: Based on available data the classification criteria are not met. STOT-repeated exposure: Based on available data the classification criteria are not met. Aspiration hazard: Aspiration Hazard Category 1 Information about hazardous ingredients in the mixture Not Applicable Refer to Sections 2 and 3 for additional information. 11.2 Information on other hazards Not Applicable Section 12. Ecological information 12.1 Toxicity: Very toxic to aquatic life with long lasting effects. 12.2 Persistence and degradability: Not available 12.3 Bioaccumulative potential: Not available 12.4 Mobility in soil: Not available 12.5 Results of PBT and vPvB assessment: This substance does not meet the PBT/vPvB criteria of REACH, annex XIII. 12.6 Endocrine disrupting properties: Not Applicable 12.7 Other adverse effects: Not available 1 Section 13. Disposal considerations 13.1 Waste treatment methods: Dispose of in accordance with local regulations. Avoid disposing into drainage systems and into the environment. Empty containers should be taken to an approved waste handling site for recycling or disposal. Section 14. Transport information 14.1 UN 14.2 UN Proper Shipping Name: 14.3