CONSEAL DRY RESIN

Hazard statements (CLP)

H225, H226, H304, H312, H315, H317, H319, H332, H335, H336, H373, H411

Code

Statements

H225

Highly Flammable liquid and vapour

SECTION 2: Hazards identification

2.1 Classification of the substance or mixture

STOT RE.2 - H373

Other physicochemical hazards

Not Classified Asp Tox.1 H304 Human health: Acute Tox.4 - H312 H332, Skin Irrit.2 - H315, Eye Irrit.2 - H319, STOT SE.3 - H335, Flam Liq.3 - H226 STOT RE.2 - H373, Asp Tox.1 H304 , Skin Sens. 1 - H317 202-

Environmental hazards

Aquatic Chronic. 2 - H411 100- Ethylbenzene 41-4 849-4 Flam Liq.2 - H225 <1

2.2 Label elements

Label In Accordance With (EC) No.

Signal word

4. FIRST AID MEASURES

Hazard statements

H226 - Flammable liquid and vapour H304 - May be fatal if swallowed and enters airways 4.1 Description of first aid measures H312 - Harmful in contact with skin General information H315 - Causes skin irritation In case of accident or if you feel unwell, seek medical advice immediately (show label where possible). Take H319 - Causes serious eye irritation off immediately all contaminated clothing. including shoes. H332 - Harmful if inhaled Inhalation H335 - May cause respiratory irritation Move patient from contaminated area to fresh air. If respiratory problems, artificial respiration/oxygen. Get H373 - May cause damage to organs through prolonged or repeated exposure if inhaled medical attention if discomfort continues H317 - May cause an allergic reaction Skin contact: H411 - Toxic to aquatic life with long lasting effects Wash immediately and thoroughly with soap and water. If skin irritation occurs, seek medical advice/attention. Contains epoxy constituents, may cause an allergic reaction Eye contact: Wash open eyes immediately and thoroughly for at least 15 minutes. Consult a physician.

Precautionary statements

Ingestion P210 - Keep away from heat/sparks/open flame, no smoking DO NOT induce vomiting, get immediate medical attention. Rinse mouth and provide fresh air. Give small P241 - Use explosion proof electrical equipment quantities of water. If vomiting occurs, keep head low so stomach content can’t get into the lungs. P260+261 - Do not breathe vapours, dust/fume/gas/mist/vapours/spray 4.2 Most important symptoms and effects, both acute and delayed P303+361+353 IF ON SKIN: Remove/Take off immediately all contaminated No data available clothing. Rinse skin with water/shower 4.3 Indication of any immediate medical attention and special treatment needed P304+340 - IF INHALED: Remove victim to fresh air and keep at rest in a position No data available comfortable for breathing P301+310 - IF SWALLOWED: Immediately call a poison centre 5. FIRE FIGHTING MEASURES P305+351+338 IF IN EYES: Rinse cautiously with water for several minutes, remove contact lenses if present and easy to do so, continue rinsing 5.1. Extinguishing media P331 - DO not induce vomiting Powder, Foam, Carbon dioxide (CO2). Do not use a full water jet P403+235 - Store in a well ventilated place 5.2. Special hazards arising from the substance or mixture P280 - Wear protective gloves/clothing/eye protection/face protection Thermal decomposition can liberate carbon oxides and other toxic gases or vapours. Vapours are heavier than P501 - Dispose of contents/container in accordance with regulations air and may travel along the floor and form explosive mixtures with air at room temperature 5.3. Advice for firefighters

2.3 Other hazards

None Known Self contained breathing apparatus and full protective clothing must be worn in case of fire. Water spray to

Results of PBT and vPvB assessment

This information is not required cool containers