Note: Ingredients listed on restricted chemical lists
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
>=20-<30
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
>=20-<30
EC/CAS
14807-96-6
Name of the chemical
Talc
Concentration
>=10-<20
EC/CAS
5873-54-1
Name of the chemical
2,4’-Methylenediphenyl diisocyanate
Concentration
>=5-<10
EC/CAS
2536-05-2
Name of the chemical
2,2’-Methylenediphenyl diisocyanate
Concentration
>=1-<5
EC/CAS
7631-86-9
Name of the chemical
Silver adsorbed on silicon dioxide
Concentration
>=1-<5
EC/CAS
126-73-8
Name of the chemical
Tributyl phosphate
Concentration
>=0.1-<1
General Information
Version
1.1
Revision date
2023-12-18
Product name
Replast Easy 210 sec 400 mL
1.2.1 Relevant identified uses
Adhesives
supplier name
Wurth USA Inc
Emergency telephone
+1 800 255 3924
Icons in SDS
Company Information
company name
Wurth USA Inc
e-mail address of the competent person responsible for the Safety Data Sheet
prodsafe@wuerth.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H317, H319, H332, H334, H335, H351, H373
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
OSHA Hazards GHS classification in accordance with the
2.1 Classification of the substance or mixture
in accordance with the
Signal word
Danger
Hazard statements
H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H332 Harmful if inhaled. H334 May cause allergy or asthma symptoms or breathing diffi- culties if inhaled. H335 May cause respiratory irritation. H351 Suspected of causing cancer. H373 May cause damage to organs (Respiratory Tract) through prolonged or repeated exposure if inhaled.
Prevention
P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P260 Do not breathe mist or vapors. P264 Wash skin thoroughly after handling. P271 Use only outdoors or in a well-ventilated area. P272 Contaminated work clothing must not be allowed out of the workplace. P280 Wear protective gloves, protective clothing, eye protection and face protection. P285 In case of inadequate ventilation wear respiratory protec- tion.
Response
P302 + P352 IF ON SKIN: Wash with plenty of soap and water. P304 + P340 + P312 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a doctor if you feel unwell. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308 + P313 IF exposed or concerned: Get medical attention. P333 + P313 If skin irritation or rash occurs: Get medical atten- P337 + P313 If eye irritation persists: Get medical attention. P342 + P311 If experiencing respiratory symptoms: Call a doc- tor. P362 + P364 Take off contaminated clothing and wash it before reuse.
Storage
P403 + P233 Store in a well-ventilated place. Keep container tightly closed. P405 Store locked up.
Disposal
P501 Dispose of contents and container to an approved waste disposal plant.
2.3 Other hazards
Excessive exposure may aggravate preexisting asthma and other respiratory disorders (e.g. em- physema, bronchitis, reactive airways dysfunction syndrome).
