Note: Ingredients listed on restricted chemical lists
EC/CAS
231-175-3/7440-66-6
Name of the chemical
Zinc
Concentration
>=50-<70
EC/CAS
265-199-0/64742-95-6
Name of the chemical
Solvent naphtha (petroleum), light arom
Concentration
>=10-<20
EC/CAS
203-571-6/108-31-6
Name of the chemical
maleic anhydride
Concentration
>=0.001-< >=0.001%
EC/CAS
231-072-3/7429-90-5
Name of the chemical
Aluminium
Concentration
>=1-<10
EC/CAS
231-072-3/14807-96-6
Name of the chemical
Talc
Concentration
>=1-<10
EC/CAS
238-877-9
Name of the chemical
Talc: Hydrated magnesium silicate
Concentration
>=1-<10
General Information
Version
14.1
Revision date
2025-02-24
Product name
Zinc 300 Brushable 500ml
1.2.1 Relevant identified uses
One-pack performance coating Professional use product
Emergency telephone
+44 (0)3300 555 444, +44 (0)3300 555 666, +44 (0)870 190 6777
Icons in SDS
Company Information
company name
Wurth UK Ltd
e-mail address of the competent person responsible for the Safety Data Sheet
prodsafe@wuerth.com
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H226, H317, H400, H410
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
Classification
Signal word
Warning
Hazard statements
H226 Flammable liquid and vapour. H317 May cause an allergic skin reaction. H410 Very toxic to aquatic life with long lasting effects.
Prevention
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P273 Avoid release to the environment. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection.
Response
P333 + P313 If skin irritation or rash occurs: Get medical advice/ attention. P370 + P378 In case of fire: Use water spray, alcohol- resistant foam, dry chemical or carbon dioxide to extinguish. P391 Collect spillage.
Hazardous Ingredients
Maleic anhydride
2.3 Other hazards
This substance/mixture contains no components considered to be either persistent, bioaccumula- tive and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. Vapours may form explosive mixture with air.
