Note: Ingredients listed on restricted chemical lists
EC/CAS
215-535-7/64742-82-1
Name of the chemical
Naphtha (petroleum), hydrodesulfurized heavy
Concentration
>=1-<2.5 25%
EC/CAS
202-966-0/101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
>=0.1-<1 >=5% >=5% >=5% >=0.1%
EC/CAS
247-722-4/26471-62-5
Name of the chemical
m-Tolylidendiisocyanat
Concentration
>=0.0025-< >=0.1%
EC/CAS
236-675-5/13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
>=1-<10
EC/CAS
215-279-6
Name of the chemical
Calcium carbonate
Concentration
>=20-<30
General Information
Version
22.1
Revision date
2025-09-26
Product name
Bond + Seal White 300ml
1.2.1 Relevant identified uses
Professional use product
1.2.2. Uses advised against
May only be used by trained personnel on use
Emergency telephone
+44 (0)3300 555 444, +44 (0)3300 555 666, +44 (0)870 190 6777
Icons in SDS
Company Information
company name
Wurth UK Ltd
e-mail address of the competent person responsible for the Safety Data Sheet
prodsafe@wuerth.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H334, H373
Hazard statements
Code
Statements
H334
May cause allergy or asthma symptoms or breathing difficulties if inhaled
Section 2
SECTION 2: Hazards identification
Regulation (EC) No. 1272/2008 Classification of the substance or mixture
Signal word
Danger
Hazard statements
H334 May cause allergy or asthma symptoms or breath- ing difficulties if inhaled. H373 May cause damage to organs through prolonged or repeated exposure.
Prevention
P260 Do not breathe vapours. P284 Wear respiratory protection.
Response
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P342 + P311 If experiencing respiratory symptoms: Call a POISON CENTER/ doctor.
Disposal
P501 Dispose of contents/ container to an approved waste disposal plant.
Hazardous Ingredients
Hydrocarbons, C9-C12, n-alkanes, isoalkanes, cyclics, aromatics (2-25%) 4,4'-Diphenylmethane diisocyanate m-Tolylidene diisocyanate "As from 24 August 2023 adequate training is required before industrial or pro- fessional use."
2.3 Other hazards
This substance/mixture contains no components considered to be either persistent, bioaccumula- tive and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. Excessive exposure may aggravate preexisting asthma and other respiratory disorders (e.g. em- physema, bronchitis, reactive airways dysfunction syndrome). Vapours may form explosive mixture with air.
2.1 Classification of the substance or mixture
Classification (REGULATION (EC) No 1272/2008) as amended by GB-CLP Regulation, UK SI 2019/720, and UK SI 2020/1567) Respiratory sensitisation, Category 1 H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled. Specific target organ toxicity - repeated H373: May cause damage to organs through pro- exposure, Category 2 longed or repeated exposure.
