Note: Ingredients listed on restricted chemical lists
EC/CAS
236-675-5/13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
>=1-<10
EC/CAS
215-535-7/64742-82-1
Name of the chemical
Naphtha (petroleum), hydrodesulfurized heavy
Concentration
>=1-<2.5 25%
EC/CAS
202-966-0/101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
>=0.1-<1 >=5% >=5% >=5% >=0.1%
EC/CAS
247-722-4/26471-62-5
Name of the chemical
m-Tolylidendiisocyanat
Concentration
>=0.0025-< >=0.1%
EC/CAS
215-279-6
Name of the chemical
Calcium carbonate
Concentration
>=20-<30
EC/CAS
215-168-2
Name of the chemical
Iron Oxide Red
Concentration
>=1-<10
General Information
Version
16.1
Revision date
2025-02-24
Product name
Bond + Seal Light Brown 300ml
1.2.1 Relevant identified uses
Adhesives, Sealant Professional use product
1.2.2. Uses advised against
May only be used by trained personnel on use
Emergency telephone
+44 (0)3300 555 444, +44 (0)3300 555 666, +44 (0)870 190 6777
Icons in SDS
Company Information
company name
Wurth UK Ltd
e-mail address of the competent person responsible for the Safety Data Sheet
prodsafe@wuerth.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H334, H373
Hazard statements
Code
Statements
H334
May cause allergy or asthma symptoms or breathing difficulties if inhaled
Section 2
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
Classification
Signal word
Danger
Hazard statements
H334 May cause allergy or asthma symptoms or breath- ing difficulties if inhaled. H373 May cause damage to organs through prolonged or repeated exposure.
Prevention
P260 Do not breathe vapours. P284 Wear respiratory protection.
Response
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P342 + P311 If experiencing respiratory symptoms: Call a POISON CENTER/ doctor.
Disposal
P501 Dispose of contents/ container to an approved waste disposal plant.
Hazardous Ingredients
Hydrocarbons, C9-C12, n-alkanes, isoalkanes, cyclics, aromatics (2-25%) 4,4'-Diphenylmethane diisocyanate m-Tolylidene diisocyanate EUH211 Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. "As from 24 August 2023 adequate training is required before industrial or pro- fessional use."
2.3 Other hazards
This substance/mixture contains no components considered to be either persistent, bioaccumula- tive and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. Excessive exposure may aggravate preexisting asthma and other respiratory disorders (e.g. em- physema, bronchitis, reactive airways dysfunction syndrome). Vapours may form explosive mixture with air.
