Note: Ingredients listed on restricted chemical lists
EC/CAS
1305-78-8
Name of the chemical
Calcium oxide
Concentration
>= 1 - < 10
EC/CAS
215-138-9/101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
>= 1 - < 3
EC/CAS
202-849-4/100-41-4
Name of the chemical
Ethylbenzene
Concentration
=1-<2,5
EC/CAS
202-849-4/108-88-3
Name of the chemical
Toluene
Concentration
>=0,25-<1
EC/CAS
202-966-0
Name of the chemical
4,4'-Methylendiphenyldiisocyanat 2,2'-Methylendiphenyldiisocyanat 2,4'-Methylendiphenyldiisocyanat Methylendiphenyldiisocyanat (790/2009)
Concentration
>= 1 - < 5
EC/CAS
203-625-9
Name of the chemical
Toluene
Concentration
>=0,25-<1
General Information
Version
21.0
Revision date
2025-04-03
Product name
ADESIVO STRUT. MONOC. PU BIANCO
1.2.1 Relevant identified uses
Sealant, Adhesives Professional use product
1.2.2. Uses advised against
May only be used by trained personnel on use
Emergency telephone
+39 0471 828 000, 02 66101029, 06 3054343, 06 49978000
Icons in SDS
Company Information
company name
Würth S.r.l
e-mail address of the competent person responsible for the Safety Data Sheet
prodsafe@wuerth.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H317, H334, H351
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
Classification
Signal word
Danger
Hazard statements
H315 Causes skin irritation. H317 May cause an allergic skin reaction. H334 May cause allergy or asthma symptoms or breath- ing difficulties if inhaled. H351 Suspected of causing cancer.
Prevention
P201 Obtain special instructions before use. P261 Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray. P264 Wash skin thoroughly after handling. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection.
Response
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P342 + P311 If experiencing respiratory symptoms: Call a POISON CENTER/ doctor.
Hazardous Ingredients
4,4'-Diphenylmethane diisocyanate Reaction mass of bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate and Methyl 1,2,2,6,6- pentamethyl-4-piperidyl sebacate
Additional information
EUH205 Contains epoxy constituents. May produce an allergic reaction. EUH212 Warning! Hazardous respirable dust may be formed when used. Do not breathe dust. "As from 24 August 2023 adequate training is required before industrial or pro- fessional use."
2.3 Other hazards
This substance/mixture contains no components considered to be either persistent, bioaccumula- tive and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
ECOLOGICAL INFORMATION
The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regu- lation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher.
TOXICOLOGICAL INFORMATION
The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. Excessive exposure may aggravate preexisting asthma and other respiratory disorders (e.g. em- physema, bronchitis, reactive airways dysfunction syndrome).
