Note: Ingredients listed on restricted chemical lists
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
>=10-<20
EC/CAS
202-966-0/101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
>=10-<20 >=5% >=5% >=5% >=0,1%
EC/CAS
238-878-4/14808-60-7
Name of the chemical
Silica, crystalline
Concentration
>=0,1-<1
EC/CAS
247-714-0
Name of the chemical
4,4'-Methylendiphenyldiisocyanat 2,2'-Methylendiphenyldiisocyanat 2,4'-Methylendiphenyldiisocyanat Methylendiphenyldiisocyanat (790/2009)
Concentration
>=5-<10 >=5% >=0,1% >=5-<10 >=5% >=5% >=5% >=0,1%
General Information
Version
13.0
Revision date
2023-05-15
Product name
REPLAST EASY PLASTIC ADHESIVE UNIVERSAL 50ML (A)
1.2.1 Relevant identified uses
Adhesives Professional use product
1.2.2. Uses advised against
May only be used by trained personnel on use
Emergency telephone
0030 210 6290800, 0030 210 6290890, 210 7793777, (0030) 210 7793777, (0030) 210 6290800
Icons in SDS
Company Information
company name
Würth Hellas SA
e-mail address of the competent person responsible for the Safety Data Sheet
prodsafe@wuerth.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H317, H319, H332, H334, H335, H351, H373
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
Classification
Signal word
Danger
Hazard statements
H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H332 Harmful if inhaled. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H335 May cause respiratory irritation. H351 Suspected of causing cancer. H373 May cause damage to organs through prolonged or repeated exposure.
Prevention
P201 Obtain special instructions before use. P264 Wash skin thoroughly after handling. P280 Wear protective gloves/ protective clothing/ eye protec- tion/ face protection.
Response
P304 + P340 + P312 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/ doctor if you feel unwell. P308 + P313 IF exposed or concerned: Get medical advice/ attention. P342 + P311 If experiencing respiratory symptoms: Call a POISON CENTER/ doctor.
Hazardous Ingredients
Diphenylmethane diisocyanate, isomers and homologues 4,4'-Diphenylmethane diisocyanate 4,4'-Methylenediphenyl diisocyanate, oligomers Isocyanic acid, polymethylenepolyphenylene ester, polymer with .alpha.-hydro-.omega.- hydroxypoly(oxy(methyl-1,2-ethanediyl)]| 4,4'-Methylenediphenyl diisocyanate, oligomeric reaction products with α-hydro-ω- hydroxypoly(oxy-1,2-ethanediyl) Reaction mass of 4,4'-methylenediphenyl diisocyanate and o-(p-isocyanatobenzyl)phenyl isocyanate Higher oligomers of polymeric MDI with propoxylated glycerol 4,4'-Methylenediphenyl diisocyanate, oligomeric reaction products with glycerol, propoxylat- ed
Additional information
"As from 24 August 2023 adequate training is required before industrial or pro- fessional use."
2.3 Other hazards
This substance/mixture contains no components considered to be either persistent, bioaccumula- tive and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
ECOLOGICAL INFORMATION
The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regu- lation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher.
TOXICOLOGICAL INFORMATION
The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. Excessive exposure may aggravate preexisting asthma and other respiratory disorders (e.g. em- physema, bronchitis, reactive airways dysfunction syndrome).
