PURLOGIC EASY WHITE 500 ML

Würth France

Revision date : 2024-11-25

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS02 GHS08
Health risk rating 5
Safety risk rating 4
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

247-714-0/26447-40-5

Name of the chemical

Methylenediphenyl diisocyanate (see also specific isomers)

Concentration

>=0,1-<1 >=5% >=5% >=5% >=0,1%

General Information

Version

13.0

Revision date

2024-11-25

Product name

PURLOGIC EASY WHITE 500 ML

1.2.1 Relevant identified uses

Sealing compound Professional use product

1.2.2. Uses advised against

May only be used by trained personnel on use

Emergency telephone

+33 (0)388 64 53 00, +33 (0)388 64 62 00, +33 (0)1 45 42 59 59, +33 (0)3 83 32

Icons in SDS

GHS02 GHS08

Company Information

company name

Würth France

e-mail address of the competent person responsible for the Safety Data Sheet

prodsafe@wuerth.com

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H222, H229, H334

Hazard statements

Code

Statements

H222

Extremely flammable aerosol

Section 2

SECTION 2: Hazards identification

2.1 Classification of the substance or mixture

Classification

Signal word

Danger

Hazard statements

H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. H334 May cause allergy or asthma symptoms or breath- ing difficulties if inhaled.

Prevention

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P211 Do not spray on an open flame or other ignition source. P251 Do not pierce or burn, even after use. P261 Avoid breathing spray.

Response

P342 + P311 If experiencing respiratory symptoms: Call a POISON CENTER/ doctor.

Storage

P410 + P412 Protect from sunlight. Do not expose to tem- peratures exceeding 50 °C/ 122 °F.

Hazardous Ingredients

Methylenediphenyl diisocyanate

Additional information

"As from 24 August 2023 adequate training is required before industrial or pro- fessional use."

2.3 Other hazards

This substance/mixture contains no components considered to be either persistent, bioaccumula- tive and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

ECOLOGICAL INFORMATION

The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regu- lation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher.

TOXICOLOGICAL INFORMATION

The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. May displace oxygen and cause rapid suffocation. Excessive exposure may aggravate preexisting asthma and other respiratory disorders (e.g. em- physema, bronchitis, reactive airways dysfunction syndrome).

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.