Note: Ingredients listed on restricted chemical lists
EC/CAS
231-111-4/7440-02-0
Name of the chemical
Nickel
Concentration
>=0,1-<1
EC/CAS
231-157-5/7440-47-3
Name of the chemical
Chromium; chromic acid and its salts
Concentration
>=10-<20
EC/CAS
232-188-7/7789-75-5
Name of the chemical
Calcium fluoride
Concentration
>=1-<10
EC/CAS
231-105-1/7439-96-5
Name of the chemical
Manganese
Concentration
>=1-<10
General Information
Version
3.0
Revision date
2025-07-04
Product name
ELECTRODO INOX. E-308L
1.2.1 Relevant identified uses
Welding rod, Arc Welding Professional use product
Emergency telephone
+34 (0)93 862 95 00, +34 (0)93 864 62 03, +34 (0)91 562 04 20, +49 (0)6132 84463
Icons in SDS
Company Information
company name
Würth España S.A
e-mail address of the competent person responsible for the Safety Data Sheet
prodsafe@wuerth.com
Section 2
SECTION 2: Hazards identification
Regulation (EC) No. 1272/2008 Classification of the substance or mixture
Additional information
EUH210 Safety data sheet available on request. EUH208 Contains nickel. May produce an allergic reaction.
2.3 Other hazards
This substance/mixture contains no components considered to be either persistent, bioaccumula- tive and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
ECOLOGICAL INFORMATION
The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regu- lation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher.
TOXICOLOGICAL INFORMATION
The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. Spatter and melting metal can cause burn injuries and may cause fire if in contact with combus- tible materials. Electric arcs produce ultraviolet (UV) and infrared (IR) radiation that may be harmful to the eyes and skin. Formation of dangerous fumes during use. The composition of the fumes is dependent upon the metal being welded and electrodes used. Inhalation of welding fumes may cause respiratory irritation, coughing, metal fume fever. Possibility of fatal electric shock from the welding equipment or electrode Persons with a pacemaker should not approach magnetic fields created in certain welding or cut- ting operations until they have consulted their doctor and obtained information from the manufac- turer of the device.
2.1 Classification of the substance or mixture
Classification (REGULATION (EC) No 1272/2008) Not a hazardous substance or mixture.
