Note: Ingredients listed on restricted chemical lists
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
N/A
EC/CAS
75-28-5
Name of the chemical
iso-Butan, enthält 0,1% Butadien
Concentration
N/A
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
N/A
EC/CAS
13674-84-5
Name of the chemical
Tris(2-chloro-1-methylethyl) phosphate
Concentration
N/A
General Information
Revision date
2020-10-15
Product name
PURLOGIC EASY, Insulating mounting foam, 553 g
1.2.1 Relevant identified uses
Foams
supplier name
Würth Canada Limited
Icons in SDS
Company Information
company name
Würth Canada Limited
e-mail address of the competent person responsible for the Safety Data Sheet
prodsafe@wurth.ca
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H222, H280, H315+H320, H317, H332, H334, H335, H336, H351, H373
Hazard statements
Code
Statements
H222
Extremely flammable aerosol
Section 2
SECTION 2: Hazards identification
GHS Classification GHS classification in accordance with the Hazardous Products Regulations Flammable aerosols Category 1 Gases under pressure Liquefied gas Acute toxicity (Inhalation) Category 4 Skin irritation Category 2 Eye irritation Category 2B Respiratory sensitization Category 1 Skin sensitization Category 1 Carcinogenicity Category 2 Specific target organ toxicity Category 3 - single exposure Specific target organ toxicity Category 2 (Respiratory Tract) - repeated exposure (Inhala- tion) Simple Asphyxiant Category 1
Signal word
Danger
Hazard statements
H222 Extremely flammable aerosol. H280 Contains gas under pressure; may explode if heated. H315 + H320 Causes skin and eye irritation. H317 May cause an allergic skin reaction. H332 Harmful if inhaled. H334 May cause allergy or asthma symptoms or breathing diffi- culties if inhaled. H335 May cause respiratory irritation. H336 May cause drowsiness or dizziness. H351 Suspected of causing cancer. H373 May cause damage to organs (Respiratory Tract) through prolonged or repeated exposure if inhaled. May displace oxygen and cause rapid suffocation.
Prevention
P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P211 Do not spray on an open flame or other ignition source. P251 Do not pierce or burn, even after use. P260 Do not breathe spray. P264 Wash skin thoroughly after handling. P271 Use only outdoors or in a well-ventilated area. P272 Contaminated work clothing should not be allowed out of the workplace. P280 Wear protective gloves, protective clothing, eye protection and face protection. P284 Wear respiratory protection.
Response
P302 + P352 IF ON SKIN: Wash with plenty of water. P304 + P340 + P312 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a doctor if you feel unwell. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308 + P313 IF exposed or concerned: Get medical attention. P333 + P313 If skin irritation or rash occurs: Get medical atten- tion. P337 + P313 If eye irritation persists: Get medical attention. P362 + P364 Take off contaminated clothing and wash it before reuse.
Storage
P405 Store locked up. P410 + P412 Protect from sunlight. Do not expose to tempera- tures exceeding 50 °C (122 °F).
Disposal
P501 Dispose of contents and container to an approved waste disposal plant.
2.3 Other hazards
Excessive exposure may aggravate preexisting asthma and other respiratory disorders (e.g. em- physema, bronchitis, reactive airways dysfunction syndrome).