Note: Ingredients listed on restricted chemical lists
EC/CAS
64742-49-0
Name of the chemical
Naphtha (petroleum), hydrotreated light
Concentration
<1
General Information
Version
7.1
Revision date
2025-12-03
Product name
RUBBER MOULDING ADHESIVE 250ML
1.2.1 Relevant identified uses
Adhesives
Icons in SDS
Company Information
company name
Wurth Australia Pty. Ltd
e-mail address of the competent person responsible for the Safety Data Sheet
product@wurth.com.au
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H225, H315, H319, H336
Hazard statements
Code
Statements
H225
Highly Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
GHS Classification GHS Classification Flammable liquids Category 2 Skin corrosion/irritation Category 2 Serious eye damage/eye irri- tation Category 2A Specific target organ toxicity - Category 3 single exposure
Signal word
Danger
Hazard statements
H225 Highly flammable liquid and vapour. H315 Causes skin irritation. H319 Causes serious eye irritation. H336 May cause drowsiness or dizziness.
Prevention
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P233 Keep container tightly closed. P240 Ground and bond container and receiving equipment. P241 Use explosion-proof electrical/ ventilating/ lighting equip- ment. P242 Use non-sparking tools. P243 Take action to prevent static discharges. P261 Avoid breathing mist or vapours. P264 Wash skin thoroughly after handling. P271 Use only outdoors or in a well-ventilated area. P280 Wear protective gloves/ protective clothing/ eye protec- tion/ face protection.
Response
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediate- ly all contaminated clothing. Rinse skin with water. P304 + P340 + P312 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/ doctor if you feel unwell. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P332 + P313 If skin irritation occurs: Get medical advice/ atten- tion. P337 + P313 If eye irritation persists: Get medical advice/ at- tention. P370 + P378 In case of fire: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide to extinguish.
Storage
P403 + P233 Store in a well-ventilated place. Keep container tightly closed. P405 Store locked up.
Disposal
P501 Dispose of contents/ container to an approved waste disposal plant.
Other hazards which do not result in classification
Vapours may form explosive mixture with air.
2.1 Classification of the substance or mixture
Flammable liquids : Category 2 Skin corrosion/irritation : Category 2 Serious eye damage/eye irri- : Category 2A tation Specific target organ toxicity - : Category 3 single exposure
