Note: Ingredients listed on restricted chemical lists
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
30-60%
EC/CAS
200-857-2/75-28-5
Name of the chemical
iso-Butan, enthält 0,1% Butadien
Concentration
5-10%
EC/CAS
201-114-5/78-40-0
Name of the chemical
Phosphoric acid, triethyl ester, TEP
Concentration
<3%
EC/CAS
203-872-2/111-46-6
Name of the chemical
diethyleneglycol
Concentration
<2%
General Information
Revision date
2022-04-11
Product name
INSEBO B1 Füllschaum
1.2.1 Relevant identified uses
Polyurethane-sealant
Icons in SDS
Company Information
company name
WS INSEBO GmbH
e-mail address of the competent person responsible for the Safety Data Sheet
office@insebo.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H222, H229, H315, H317, H319, H332, H334, H335, H351, H373
Hazard statements
Code
Statements
H222
Extremely flammable aerosol
Section 2
SECTION 2: Hazards identification
Regulation (EC) No. 1272/2008 Classification of the substance or mixture
Hazard pictograms
GHS02 GHS07 GHS08
Signal word
Danger
Hazardous Ingredients
diphenylmethanediisocyanate,isomeres and homologues
Hazard statements
H222-H229 Extremely flammable aerosol. Pressurised container: May burst if heated. H332 Harmful if inhaled. H315 Causes skin irritation. H319 Causes serious eye irritation. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H317 May cause an allergic skin reaction. H351 Suspected of causing cancer. H335 May cause respiratory irritation. Trade name:INSEBO B1 Füllschaum (Contd. of page 1) H373 May cause damage to organs through prolonged or repeated exposure.
Precautionary statements
P102 Keep out of reach of children. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P211 Do not spray on an open flame or other ignition source. P251 Do not pierce or burn, even after use. P261 Avoid breathing vapours/spray. P271 Use only outdoors or in a well-ventilated area. P280 Wear protective gloves, eye protection. P302+P352 IF ON SKIN: Wash with plenty of water and soap. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P314 Get medical advice/attention if you feel unwell. P405 Store locked up. P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. P501 Dispose of contents/container to hazardous or special waste collection point. Additional safetyphrases according to Annex XVII of the Commission Regulation No.1907/2006: Persons already sensitised to diisocyanates may develop allergic reactions when using this product. Persons suffering from asthma, eczema or skin problems should avoid contact, including dermal contact, with this product. This product should not be used under conditions of poor ventilation unless a protective mask with an appropriate gas filter (i.e. type A1 according to standard EN 14387) is used. As from 24 August 2023 adequate training is required before industrial or professional use.
2.1 Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 Aerosol 1 H222-H229 Extremely flammable aerosol. Pressurised container: May burst if heated. Acute Tox. 4 H332 Harmful if inhaled. Skin Irrit. 2 H315 Causes skin irritation. Eye Irrit. 2 H319 Causes serious eye irritation. Resp. Sens. 1 H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. Skin Sens. 1 H317 May cause an allergic skin reaction. Carc. 2 H351 Suspected of causing cancer. STOT SE 3 H335 May cause respiratory irritation. STOT RE 2 H373 May cause damage to organs through prolonged or repeated exposure.