Note: Ingredients listed on restricted chemical lists
General Information
Revision date
2017-07-05
Product name
Polyethylene films laminated with non-woven geo-textile fabric
Product Synonyms
Barrier-Bac VBC-90, Barrier-Bac VBC-90W, Barrier-Bac VBC-350
1.2.1 Relevant identified uses
Vapor barrier films Restriction(s) on use of the substance: None known
Emergency telephone
(361) 874- 3737
Icons in SDS
Company Information
company name
World-Pak Division, Inteplast Group Corporation
GHS Information
Signal word
Warning!
Section 2
SECTION 2: Hazards identification
OSHA Hazards Physical Appearance: Films that are natural translucent or in various colors Immediate Concerns: When using or handling Barrier-Bac® Films as supplied, there are very low hazards. OSHA Hazard Category: Combustible dust
Hazard statements
Categories Not classified
Signal word
Warning! This product as shipped is not classified as a combustible dust; however, a combustible concentration of dust may occur if fine powders accumulated or suspended in an enclosed or confined area (e.g. from cutting or sanding the Barrier-Bac® Films).
Hazard pictograms
There is no pictogram for a combustible dust hazard Rough edges of Barrier-Bac® Films could result in minor cuts to hands. Appropriate gloves should be worn to prevent cuts and/or scraps. Avoid contact with strong oxidizing agents. When working with the Barrier-Bac® Films at hot temperatures, the material may begin to decompose producing fumes that can contain carbon dioxide, carbon monoxide, and other unidentified organic compounds that come from the breakdown of the materials used to make the films. Adequate ventilation should be provided to minimize exposures to vapors and fumes. When cutting, shaping or modifying Barrier-Bac® Films, other hazards may exist.
Potential health effects
Eyes: Dust from cutting may result and mechanically irritate the eyes; if using elevated temperatures, vapors may irritate eyes. Skin: Cuts or scraps referenced above; if using elevated temperatures to soften the Barrier-Bac® Films, exposure to molten resin may cause thermal burns. Ingestion: May cause choking if swallowed. Sheet Inhalation: Inhalation of dust at high concentration may cause irritation of the respiratory system; inhalation of vapors from use of elevated temperatures may also cause irritation of the respiratory system.