Wilsonart 130 Adhesive Solvent

Hazard statements (CLP)

H225, H319, H336, H361, H373

Code

Statements

H225

Highly Flammable liquid and vapour

SECTION 2: Hazards identification

Classification of the substance or mixture GHS classification Flam. Liq. 2 H225 Eye Irrit. 2A H319 Repr. 2 H361 STOT SE 3 H336 STOT RE 2 H373

2.2 Label elements

GHS-US labelling

Hazard pictograms

GHS02 GHS07 GHS08

Signal word

Danger

Hazard statements

H225 - Highly flammable liquid and vapour H319 - Causes serious eye irritation H336 - May cause drowsiness or dizziness H361 - Suspected of damaging fertility. Suspected of damaging the unborn child H373 - May cause damage to organs through prolonged or repeated exposure

Precautionary statements

P201 - Obtain special instructions before use P202 - Do not handle until all safety precautions have been read and understood P210 - Keep away from heat, hot surfaces, open flames, sparks. - No smoking P233 - Keep container tightly closed P240 - Ground/bond container and receiving equipment P241 - Use explosion-proof electrical, lighting, ventilating equipment P242 - Use only non-sparking tools P243 - Take precautionary measures against static discharge P260 - Do not breathe mist, spray, vapours P264 - Wash hands, forearms and face thoroughly after handling P271 - Use only outdoors or in a well-ventilated area P280 - Wear eye protection, protective clothing, protective gloves P303+P361+P353 - IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower P304+P340 - IF INHALED: Remove person to fresh air and keep comfortable for breathing P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing P308+P313 - If exposed or concerned: Get medical advice/attention P312 - Call a doctor, a poison center if you feel unwell P314 - Get medical advice/attention if you feel unwell P337+P313 - If eye irritation persists: Get medical advice/attention P370+P378 - In case of fire: Use alcohol resistant foam, carbon dioxide (CO2), dry extinguishing powder to extinguish P403+P233+P235 - Store in a well-ventilated place. Keep container tightly closed. Keep cool P405 - Store locked up P501 - Dispose of contents/container to hazardous or special waste collection point, in 09/03/2015 Wilsonart 130 Adhesive Solvent Page 1 accordance with local, regional, national and/or international regulation

2.3 Other hazards

No additional information available

Ingredient(s) with unknown acute toxicity

No data available

2.1 Classification of the substance or mixture

GHS classification Flam. Liq. 2 H225 Eye Irrit. 2A H319 Repr. 2 H361 STOT SE 3 H336 STOT RE 2 H373