WIDOPUR 1K

Hazard statements (CLP)

H226, H315, H319, H334, H373

Code

Statements

H226

Flammable liquid and vapour

SECTION 2: Hazards identification

Regulation (EC) No. 1272/2008 Classification of the substance or mixture

Hazard pictograms

GHS02 GHS08

Signal word

Danger Hazardous component(s) to be indicated on label: Reaction mass of xylene and ethylbenzene m-tolylidene diisocyanate

Hazard statements

H226 Flammable liquid and vapour. H315 Causes skin irritation. H319 Causes serious eye irritation. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H373 May cause damage to organs through prolonged or repeated exposure

Precautionary statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P280 Wear protective gloves/protective clothing/eye protection. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P337+P313 If eye irritation persists: Get medical advice/attention. P342+P311 If experiencing respiratory symptoms: Call a POISON CENTER/doctor. P370+P378 In case of fire: Use water spray, carbon dioxide, dry chemical or foam to extinguish.

Supplemental label elements

‘As from 24 August 2023 adequate training is required before industrial or professional use’

2.3 Other hazards

This product does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. PBT assessment No data available. vPvB assessment No data available.

2.1 Classification of the substance or mixture

Classification in accordance with Regulation (EC) No 1272/2008 (CLP) Eye Irrit. 2; H319 Flam. Liq. 3; H226 Resp. Sens. 1; H334 Skin Irrit. 2; H315 STOT RE 2; H373 Classification information This product is assessed and classified using the methods and criteria below referred to in Article 9 of Regulation (EC) n° 1272/2008: Physical hazards: determined through assessment data based on the methods or standards referred to in part 2 of Annex I to CLP Health hazards and environmental hazards: determined through toxicological and ecotoxicological assessment data based on the methods or standards referred to in Part 3, 4 and 5 of Annex I to CLP.