2LIR18500-PCM-NTC-LD (Brady M211 Mobile Printer with Li-ion Battery)

SECTION 2: Hazards identification

2.1 GLOBAL HARMONIZATION LABELING AND CLASSIFICATION: This product is an article and is not required to be classified under any jurisdiction. The lithium ion cell ingredients are contained in a hermetically sealed case, designed to withstand temperatures and pressures encountered during normal use. As a result, during normal use, hazardous materials are fully contained inside the battery. The printer and its battery should not be crushed, deformed, punctured, opened or exposed to heat because exposure to the ingredients contained within could be harmful under some circumstances. The following information is provided for the user's information only. 2.2 HAZARD OVERVIEW

Product definition

This product is a lithium ion battery

Health hazards

This product is considered a manufactured article and presents negligible health, physical or reactivity hazards under typical use conditions. If exposure to the battery’s electrical solution occurs from puncture, heating or other destruction of the outer case, contact with the solution may be harmful by inhalation, skin or eye contact. Inhalation of fumes from burning electrolyte solution may cause burns to respiratory system. Skin or eye contact with the electrolyte solution may also produce burns, especially if contact is prolonged. Damage to the printer unit may present a hazard of electric shock under certain circumstances. 2.2.3 Flammability Hazards: Batteries can explode during a fire. If involved in a fire, this product can burn and produce toxic gases (e.g., carbon, cobalt, copper, lithium, manganese, phosphorous, nickel oxides and other metal oxides, hydrogen fluoride, phosphine). During a fire involving this product care should be taken to avoid inhalation of fumes. During charging of the battery of this printer, a lithium graphite intercalation phase is formed (where lithium and graphite molecules are combined), which is highly flammable and corrosive, but is not released under normal circumstances. 2.2.4 Reactivity Hazards: If the printer is somehow submerged, allowing water into the battery case, the electrolyte solution can react with water to form hydrofluoric acid. Contact of water with the anodes can produce hydrogen gas.

Environmental hazards

This product is not expected to cause harm if released to the environment. However, the product must be disposed of properly in order to avoid environmental contamination; breakdown of compounds in this product overtime in the environment may result in the release of materials toxic to aquatic and terrestrial organisms.

2.3 Other hazards

Physical damage to the battery, exposure to rain or water or freezing temperatures can cause battery to fail and may result in fire. Exposure to oils or solvents can damage the case and cause failure. 2.2.7 Emergency Response Considerations: Emergency responders must wear proper personal protective equipment (and have appropriate fire protection) suitable for the situation to which they are responding. 2.3 PERCENT OF UNKNOWN ACUTE TOXICITY: Not applicable for articles.