Note: Ingredients listed on restricted chemical lists
EC/CAS
231-072-3/7429-90-5
Name of the chemical
Aluminium
Concentration
N/A
EC/CAS
231-159-6/7440-50-8
Name of the chemical
Copper
Concentration
N/A
EC/CAS
202-510-0/96-49-1
Name of the chemical
ethylene carbonate
Concentration
5-523
EC/CAS
210-478-4/616-38-6
Name of the chemical
dimethyl carbonate
Concentration
2-2853
EC/CAS
231-153-3/7440-44-0
Name of the chemical
Carbon black
Concentration
N/A
EC/CAS
235-362-0/12190-79-3
Name of the chemical
Cobaltate (CoO21-), lithium
Concentration
1-100,1-
General Information
Version
6
Revision date
2021-11-30
Product name
1.1.1
1.2.1 Relevant identified uses
Lithium Ion Polymer Battery Cell (Lithium, Cobalt Dioxide Chemistry) used in M210(-LAB)
supplier name
Entrusted by Brady Worldwide Inc
Manufacturer Name
ICC Electronics (Dongguan) Ltd
Emergency telephone
1-800-535-5053
Icons in SDS
Company Information
company name
WH Brady NV
e-mail address of the competent person responsible for the Safety Data Sheet
REACH_Americas@bradycorp.com
Section 2
SECTION 2: Hazards identification
2.1 GLOBAL HARMONIZATION LABELING AND CLASSIFICATION: This product is an article and is not required to be classified under any jurisdiction. The lithium ion cell ingredients are contained in a hermetically sealed case, designed to withstand temperatures and pressures encountered during normal use. As a result, during normal use, hazardous materials are fully contained inside the battery. The battery should not be crushed, deformed, punctured, opened or exposed to heat because exposure to the ingredients contained within could be harmful under some circumstances. The following information is provided for the user's information only. 2.2 HAZARD OVERVIEW: 2.2.1
Product definition
This product is a lithium ion battery 2.2.2
Health hazards
This product is considered a manufactured article and presents negligible health, or reactivity hazards under typical use conditions. If exposure to the electrolyte solution occurs from puncture, heating or other destruction of the outer case, contact with the solution may be harmful by inhalation, skin or eye contact. Inhalation of fumes from burning electrolyte solution may cause burns to respiratory system. Skin or eye contact with the electrolyte solution may also produce burns, especially if contact is prolonged. Contact with the electrodes may result in electric shock under certain circumstances of contact. 2.2.3 Flammability Hazards: Batteries can explode during a fire. If involved in a fire, this product can burn and produce toxic gases (e.g., carbon monoxide, carbon dioxide, hydrogen fluoride, phosphine, phosphorous oxides, lithium oxides, lithium hydroxide, nickel oxides, copper oxides and other metal oxides). During a fire involving this product care should be taken to avoid inhalation of fumes. During charging of this battery, a lithium graphite intercalation phase is formed (where lithium and graphite molecules are combined), which is highly flammable and corrosive, but is not released under normal circumstances. 2.2.4 Reactivity Hazards: The electrolyte solution can react with water to form hydrofluoric acid. Contact with the anodes can produce hydrogen gas. 2.2.5
2.3 Other hazards
Physical damage to the battery, exposure to rain or water or freezing temperatures can cause battery to fail and may result in fire. Exposure to oils or solvents can damage the case and cause failure. 2.2.6
Environmental hazards
This product is not expected to cause harm if released to the environment 2.2.7 Emergency Response Considerations: Emergency responders must wear proper personal protective equipment (and have appropriate fire protection) suitable for the situation to which they are responding. 2.3 PERCENT OF UNKNOWN ACUTE TOXICITY: Not applicable for articles.