Steel Rebar

Hazard statements (CLP)

H317, H350, H372

Code

Statements

H317

May cause an allergic skin reaction

Signal word

DANGER This product may present a health hazard from direct contact. Additionally, downstream processes such as welding, sawing, brazing, grinding, or abrasive blasting may result in the formation of fumes and/or dust that have the potential hazards described below:

Hazard pictograms

HEALTH Carcinogen- Category 1B May cause cancer (H350) * Specific Target Organ Toxicity- Inhalation may cause damage to Repeated Exposure respiratory tract through prolonged (STOT) or repeated exposure Category 1 (H372) 2. Hazard(s) Identification (cont’d.) Skin Sensitizer May cause an allergic skin Category 1 reaction (H317) Combustible Dust If small particles accumulate None (OSHA Defined Hazard) during further processing, handling, or by other means, may form combustible dust concentrations in air.

Hazard statements

GHS)

HMIS® ratings

Scale 0-4) Health = 2* Fire = 0 Physical Hazard = 0

NFPA Ratings

Scale 0-4) Health = 2 Fire = 0 Reactivity = 0

Prevention

P202: Do not handle until all safety precautions have been read and understood. P261+284: Avoid breathing dust/fumes. In case of inadequate ventilation wear an approved respirator suitable for conditions of use. P272: Contaminated work clothing should not be allowed out of the workplace. P280: Wear appropriate protective equipment for eye and skin exposure.

Response

P304+P340+P313: If inhaled and breathing becomes difficult, remove person to fresh air and keep comfortable for breathing. If symptoms persist, call a doctor or other qualified medical professional. P333+P313: If skin irritation or rash occurs get medical advice/attention. P352+P264: If on skin wash with plenty of soap and water. P305+P351+P338: If in eyes, rinse cautiously for several minutes. Remove contact lenses if present and easy to do so.

Disposal

P501: Dispose of in accordance with federal, state and local regulations Ingredients of Unknown Acute Toxicity (>1%): NAP