Casting; Underlayment; Interior/Exterior

Hazard categories

Carcinogen – Category 1A Skin Corrosion – Category 1B Skin Sensitization – Category 1B Specific Target Organ Toxicity Repeat Exposure – Category 1 Specific Target Organ Toxicity: Single Exposure – Category 3

Signal word

Danger

Hazard statements

May cause cancer through chronic inhalation. Causes severe skin burns and serious eye damage May cause an allergic skin reaction. Causes damage to lungs through prolonged or repeated inhala- tion. May cause respiratory irritation.

Prevention

Do not handle until all safety precautions have been read and understood. Wear impervious gloves, such as nitrile. Wear eye protection, and protective clothing. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Use only in a well-ventilated area. Do not breathe dust.

Response

If swallowed: Rinse mouth. Do NOT induce vomiting. If inhaled: Remove person to fresh air and keep comfortable for breathing. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If on skin (or hair): Remove immediately all contaminated clothing and wash before re-use. Rinse skin or hair with water. If significant skin irritation or rash occurs: get medical advice or attention. Immediately seek medical advice or attention if symptoms are significant or persist.

Storage

Store locked up. Store in a well-ventilated place. Keep container tightly closed

Disposal

Dispose of contents and container in accordance with all local, regional, national and international regulations.

Additional information

The Portland cement in this product can cause serious, potentially irreversible damage to skin, eye, respiratory and digestive tracts due to chemical (caustic) burns, including third degree burns. Burns from Portland cement may not cause immediate pain or discomfort. You cannot rely on pain to alert you to cement burns. Therefore precautions must be taken to prevent all contact with Portland cement. Cement burns can become worse even after contact has ended. If there is contact with this product, imme- diately remove all product from body and thoroughly rinse with water. If you experience or suspect a cement burn or inflammation you should immediately see a health care professional. Skin burns and irritation may be caused by brief exposure, though often are caused by extended exposure of 15 minutes, an hour, or longer. Interaction of Portland cement with water or sweat releases a caustic solu- tion which produces the burns or irritation. Any extended exposure should be treated as though a burn has occurred until determined otherwise. Skin contact with Portland cement can also cause inflammation of the skin, referred to as dermatitis. Signs and symptoms of dermatitis can include itching, redness, swelling, blisters, scaling, and other changes in the normal condition of the skin. Signs and symptoms of burns include the above and whitening, yellowing, blackening, peeling or cracking of skin. The Portland cement in this product may cause allergic contact dermatitis in sensitized individuals. This overreaction of the immune system can lead to severe inflammation. Sensitization may result from a single exposure to the low levels of Cr(VI) in Portland cement or repeated exposures over months or years. Sensiti- zation is long lasting and, after sensitization, even very small quantities can trigger the dermatitis. Sensitiza- tion is uncommon. Individuals who experience skin problems, including seemingly minor ones, are advised to seek medical attention.