Extinguish Plus

SECTION 2: Hazards identification

Communication Standard), this product is considered hazardous. 0410812021 EN (English US) Page 1

Ingredient(s) with unknown acute toxicity

Not applicable 3.1. Substances Not applicable 3.2. Mixtures Name

Product definition

Hydramethylnon (CAS-No 67485-29-4 036 (s)-Methoprene Technical (CAS-No 65733-1 6-6 025 Hydroquinone, tert-butyl- (CAS-No 1 948-33-0 005 Defatted Grits (CAS-No 68525-86-0 85-95 Non-hazardous and/or does not meet criteria for classification (CAS-No N/A Balance 4.1. Description of first aid measures First-aid measures after inhalation lF INHALED: Remove person to fresh air and keep comfortable for breathing Call a POISON CENTER or doctor/physician if you feel unwell, Firstaid measures after skin contact lF ON SKIN Wash with plenty of soap and water lf skin irritation or rash occurs Get medical advice/attentio n, First-aid measures after eye contact lF lN EYES: Rinse cautiously with water for several minutes Remove contact lenses, if present and easy to do. Continue rinsing lf eye irritation persists: Get medical advice and attention Firstaid measures after ingestion lF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell. Rinse mouth. Do NOT induce vomiting unless directed to do so by medical personnel 4.2. Most important symptoms and effects (acute and delayed) Symptoms/effects May damage fertility or the unborn child. Symptoms/effects after skin contact May cause an allergic reaction in jndividuals with a sensitivity to hydroquinone, tert-butyl- 4.3. lmmediate medical aftention and special treatment, if necessary Treat symptomatically. 5.1. Suitable (and unsuitable) extinguishing media Suitable extinguishing media Water spray. Dry powder. Foam. Carbon dioxide. Unsuitable extinguishing media Avoid heavy hose streams 5.2. Specific hazards arising from the chemical Explosion hazard Fine dust dispersed in air in sufficient concentrations, and in the presence of an ignition source is a potential dust explosion hazard Reactivity This material is friable and can create small dust particles during any handling, processing, and transfer operations This material can form explosive dusUair suspensions that are ignitable under some conditions 5.3. Special protective equipment and precautions for fire-fighters Firefig hting instructions Combustible dust - use low-pressure medium fog streams to avoid dust clouds. Ventilate closed spaces before entering Eliminate ignition sources. Protection during firefighting Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus, Complete protective clothing 6.1. Personal precautions, protective equipment and emergency procedures 6.1.1. Fornon-emergencypersonnel Emergency procedures Do not breathe dust. No flames, no sparks. Eliminate all sources of ignition. Avoid contact with skin, eyes and clothing 6.1.2. For emergency responders Protective equipment Do not attempt to take action without suitable protective equipment Positive pressure self- contained breathing apparatus (SCBA) 04t08t2021 EN (English US) Emergency procedures Contain spill and monitor for excessive dust accumulation, ELIMINATE all ignition sources (no smoking, flares, sparks orflames in immediate area), Ventilate closed spaces before entering. Turn off electric power to area. As an immediate precautionary measure, isolate spill or leak area for at least'100 meters (330 feet) in all directions, Evacuate area Stay upwind. Use grounded electrical/mechanical equipment wear approprlate personal protective equipment, avoid direct contact, 6.2. Environmental precautrons Avoid release to the environment 6,3. Methods and material for containment and cleaning up Methods for cleaning up Use appropriate PPE, sweep or scoop spills, dispose of any unusable material in approved landfill Avoid dust formation. Dust deposits should not be allowed to accumulate on surfaces, as these may form an explosive mixture if they are released into the atmosphere in sufficient concentration Non-sparking tools should be used 7.1. Precautions for safe handling Precautions for safe handling Ensure good ventilation of nal protective equipment. Keep away from heat, hot surfaces, sp ignition sources. No smoking. Finely divided: keep away from ig contact with skin, eyes and clothing. Avoid generating or breath Hygiene measures Do not eat, drink or smoke when using this product Always wash hands after handling the product 7.2. Conditions for safe storage, including any incompatibilities Storage conditions Store in a well-ventilated place. Keep cool, Avoid humid, wet or moist conditions Store in a dry place. Store in a closed container. This product is formulated with oil. Prolonged exposure to air may turn oil rancid and reducethe attractiveness of the bait. Use within 3 months after opening Store locked up. I ncompatible materials Heat, sparks, open flame Strong acids Strong bases Strong oxidizers 8.1. Controlparameters No additional rnformation available 8.2. Appropriateengineeringcontrols Appropriate engineering controls Adequate ventilation systems as needed to control concentrations of airborne contaminants below applicable threshold limit values. lt is recommended that dust control equipment such as local exhaust ventilation and material transport systems involved in handling of this product contain explosion relief vents or an explosion suppression system or an oxygen-deficient

Environmental hazards

Environmental exposure controls Avoid release to the environment 8.3. lndividual protection measures/Personal protectiveequipment Hand protection: Protective gloves Eye protection: Safety glasses Skin and body protection: Wear long sleeved shirt, long pants, socks and shoes Respiratory protection: ln case of insufficient ventilation, use NIOSH approved respiratory protection 04loal2021 EN (English US) !]I!J 9.'l . lnformation on basic physical and chemical properties Physical state Solid Appearance Pale yellow granule Color Pale yellow Odor Mild, corn-like Odor threshold No data available pH Not relavent Melting point No data available Freezing point Not applicable Boiling point No data available Flash point No data available Relative evaporation rate (butyl acetate=1) No data available Flammability (solid, gas) Non-flammable Vapor pressure No data available Relative vapor density at 20 "C No data available Relative density 1.08 g/cc Bulk density 19 tb/ft3 Solubility lnsoluble Partition coefficient n-octanol/water (Log Pow) No data available Auto-ig n ition temperature Not applicable Decomposition temperatu re No data available Viscosity, kinematic Not applicable Viscosity, dynamic Not applicable Explosion limits Not applicable Explosive properties Not explosive Oxidizing properties Not applicable 9.2. Other information No additional information available 10.1. Reactivity This material is friable and can create small dust particles during any handling, processing, and transfer operations. This material can form explosive dusi/air suspensions that are ignitable under some conditions 10.2. Chemicalstability Stable under normal conditions