Note: Ingredients listed on restricted chemical lists
EC/CAS
270-704-2/68476-85-7
Name of the chemical
Petroleum gases, liquefied
Concentration
20-<40
General Information
Revision date
2013-10-21
Product name
Weldtite TF2 Lubricant with Teflon
Emergency telephone
44 (0) 1652 660000 Mo-Fr 8 00 - 17 00
Icons in SDS
Company Information
company name
Weldtite Products Ltd
e-mail address of the competent person responsible for the Safety Data Sheet
sales@weldtite.co.uk
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H222, H229, H319
Hazard statements
Code
Statements
H222
Extremely flammable aerosol
Section 2
Signal word
DANGER Aerosol 1 H222 Extremely flammable aerosol. H229 Pressurised container May burst if heated. Eye Irrit. 2: H319 Causes serious eye irritation. EUH066 Repeated exposure may cause skin dryness or cracking. DANGER
EU Classification
Regulation 67/548/EEC or 1999/45/EC
Hazard pictograms
Extremely flammable
R-phrase(s)
R 12: Extremely flammable. R 66: Repeated exposure may cause skin dryness or cracking.
2.2 Label elements
The product is classified and required to be labelled in accordance with EC-Directives Labelling according to Regulation (EC) 1272/2008
Hazard statements
H222 Extremely flammable aerosol. H229 Pressurised container: May burst if heated. H319 Causes serious eye irritation. EUH066 Repeated exposure may cause skin dryness or cracking.
Precautionary statements
P101 If medical advice is needed, have product container or label at hand. P102 Keep out of reach of children. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P211 Do not spray on an open flame or other ignition source. P251 Do not pierce or burn, even after use. P280 Wear protective gloves/eye protection/face protection. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+P313 If eye irritation persists: Get medical advice/attention. P410+P412 Protect from sunlight. Do no expose to temperatures exceeding 50 °C/122°F.
Other physicochemical hazards
Heat causes increase in pressure and risk of bursting.
Other hazards
Further hazards were not determined with the current level of knowledge.