Note: Ingredients listed on restricted chemical lists
EC/CAS
68476-86-8
Name of the chemical
Petroleum gases, liquefied, sweetened
Concentration
20-30
EC/CAS
108-88-3
Name of the chemical
Toluene
Concentration
1-10
EC/CAS
123-86-4
Name of the chemical
acetic acid, butyl ester
Concentration
1-10
General Information
Revision date
2020-03-17
Product name
Weldcote Zinc Galvanizing Spray
1.2.1 Relevant identified uses
Galvanizing repair 1.2.2 Uses advised Reference the [7. Handling and storage]
supplier name
Weldcote Metals Inc
Emergency telephone
(800) 424-9300
Icons in SDS
Company Information
company name
Weldcote Metals Inc
e-mail address of the competent person responsible for the Safety Data Sheet
info@weldcotemetals.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H222, H280, H304, H315, H319, H336, H351, H361, H373
Hazard statements
Code
Statements
H222
Extremely flammable aerosol
Section 2
2.1 Classification of the substance or mixture
The product is placed on the market in liquid/spray form 2.1.1 Classification in accordance with GHS-US Skin corrosion/irritation Cat 2 Serious Eye damage/eye Irritant Cat 2A Carcinogenicity Cat 2 Reproductive Toxicity Cat 2 Specific target organ toxicity (single exp) Cat 3 Specific target organ toxicity (repeated) Cat 2 Aspiration toxicity Cat 1 Flammable aerosols Cat 1 Gases under pressure Compressed Gas
2.2 Label elements
GHS-US labeling
Hazard statements
H315 Causes skin irritation H319 Causes serious eye irritation H351 Suspected of causing cancer H361 Suspected of damaging fertility or the unborn child H336 May cause drowsiness or dizziness H373 May cause damage to organs (central nervous system, eyes, kidney, liver, respiratory system, and skin) through prolonged or repeated exposure H304 May be fatal if swallowed and enters airways H222 Extremely flammable aerosol H280 Contains gas under pressure; may explode if heated
Precautionary statements
P201 Obtain special instructions before use P202 Do not handle until all safety precautions have been read and understood P280 Wear protective gloves/protective clothing/eye protection/face protection P264 Wash face, hands and any exposed skin thoroughly after handling P260 Do not breathe dust/fumes/gas/mist/vapors/spray P271 Use only outdoors or in a well-ventilated area P210 Keep away from heat/sparks/open flames/hot surfaces – No smoking P211 Do not spray on an open flame or other ignition source P251 Pressurized container: Do not pierce or burn, even after use P308+P313 IF EXPOSED OR CONCERNED: Get medical advice/attention P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing. Soldering Liquid Flux General Purpose Galvanizing spray-SAFETY DATA SHEET Pg 2 SAFETY DATA SHEET Control # 1050 date 5/29/15 P331 Do NOT induce vomiting P337+P313 If eye irritation persists get medical advice/attention. P301+P310 IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician P304+P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. P337+P313 IF EYE IRRITATION PERSISTES: Get medical advice/attention P312 Call a POISON CENTER or doctor/physician if you feel unwell. P405 Store locked up P403+P233 Store in a well-ventilated place. Keep container tightly closed P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F P501 Dispose of contents/container to an approved waste disposal plant
2.3 Other hazards
No additional information available 2.4
Ingredient(s) with unknown acute toxicity
Toxic to aquatic life with long lasting effects SECTION: 3