Note: Ingredients listed on restricted chemical lists
EC/CAS
7429-90-5
Name of the chemical
Aluminium
Concentration
0.0-5.0
EC/CAS
1344-09-8
Name of the chemical
Silicic acid, sodium salt
Concentration
0.0-5.0
EC/CAS
65996-61-4
Name of the chemical
Cellulose pulp
Concentration
≤5.0
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
0.0-3.0
EC/CAS
1344-28-1
Name of the chemical
aluminium oxide
Concentration
0.0-1.0
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
0.15-0.2
EC/CAS
7789-75-5
Name of the chemical
Calcium fluoride
Concentration
≤0.01
EC/CAS
1314-13-2
Name of the chemical
Zinc oxide; C.I. 77947
Concentration
≤0.01
General Information
Revision date
2015-10-22
Product name
Carbon Steel Electrodes
Product name
Carbon Steel Electrodes
Identification on the label/Trade name
AWS A5.1
1.2.1 Relevant identified uses
For welding consumables and related products 1.2.2 Uses advised Reference the [ 7. Handling and storage ]
supplier name
Weld Wire Company, Inc
Icons in SDS
Company Information
company name
Weld Wire Company, Inc
e-mail address of the competent person responsible for the Safety Data Sheet
info@weldwire.net
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H302, H350, H400
Hazard statements
Code
Statements
H302
Harmful if swallowed
Section 2
SECTION 2: Hazards identification
Classification of the mixture The product is placed on the market in solid form General Hazard Statement: Solid metallic products are generally classified as “articles” and do not constitute a hazardous material in
2.2 Label elements
GHS-US labeling
Hazard pictograms
GHS07 GHS08 GHS09
Signal word
Danger
Hazard statements
H302 Harmful if swallowed H350 May cause cancer H400 Very toxic to aquatic life
Precautionary statements
P201 Obtain special instructions before use P202 Do not handle until all safety precautions have been read and understood. P264 Wash thoroughly after handling P270 Do not eat, drink or smoke when using this product. P273 Avoid release into the environment P280 Wear protectective gloves/protective clothing/eye protection/face protection. P301+P312 IF SWALLOWED: call a POISON CENTER or doctor/physician if you feel unwell. P308+P313 If exposed or concerned: Get medical advice/attention. P330 Rinse mouth P391 Collect spillage P405 Store locked up P501 Dispose of contents and container in accordance with local/regional/national/international regulations.
2.3 Other hazards
No additional information available
Ingredient(s) with unknown acute toxicity
No data available SECTION: 3
2.1 Classification of the substance or mixture
* The product is placed on the market in solid form General Hazard Statement: Solid metallic products are generally classified as “articles” and do not constitute a hazardous material in solid form under the definitions of the OSHA Hazard Communication Standard (29 CFR 1910.1200). Any articles manufactured from these solid products would be generally classified as non-hazardous. However some hazardous elements contained in these products can be emitted under certain processing conditions such as but not limited to: burning, melting, cutting, sawing, brazing, grinding, machining, milling, and welding. Products in the solid state present no fire or explosion hazard. Small chips, fines, and dust may ignite readily, though. The following classification information is for the hazardous elements which may be released during processing. 2.1.1 Classification in accordance with GHS-US Acute Tox. 4 (Oral) H302 Carc. 1A H350 Aquatic Acute 1 H400
