Microbond Powders

Hazard statements (CLP)

H314, H335, H350, H373

Code

Statements

H314

Causes severe skin burns and eye damage

OSHA HCS Classification

Health, Skin corrosion/irritation, 1 Health, Specific target organ toxicity - Single exposure, 3 Health, Carcinogenicity, 1 Health, Specific target organ toxicity - Repeated exposure, 2

Signal word

DANGER

Hazard statements

H314 - Causes severe skin burns and eye damage H335 - May cause respiratory irritation H350 - May cause cancer H373 - May cause damage to organs through prolonged or repeated exposure CGA-HG11 - SYMPTOMS MAY BE DELAYED.

Precautionary statements

P232 - Protect from moisture. P261 - Avoid breathing dust/fume/gas/mist/vapors/spray. P271 - Use only outdoors or in a well-ventilated area. P280 - Wear protective gloves/protective clothing/eye protection/face protection. CGA-PG27 - Read and follow the Safety Data Sheet (SOS) before use.

Principle Routes of Exposure

Eyes; Skin Target Organs: Throat; Nose, Respiratory system Inhalation: Use sufficient ventilation, local exhaust at the arc, or both to keep the fumes and gases below TLV's in the workers breathing zone. In confined spaces use respirable fume respirator or air-supplied respirator ACCUTE EFFECTS: Irritating to the nose, throat and respiratory tract. SUBCHRONIC/CHRONIC TOXICITY CHRONIC Chronic overexposure to welding fumes can result in Chronic respiratory problems, iron build-up in the lungs, bone erosion, reduced pulmonary functions and nervous disorders. Skin Contact: The bright light produced by the arc can burn skin and eyes Eye Contact: Fumes may be moderately irritating to the eyes