Note: Ingredients listed on restricted chemical lists
EC/CAS
141-78-6
Name of the chemical
acetic acid, ethyl ester
Concentration
N/A
EC/CAS
64742-95-6
Name of the chemical
Solvent naphtha (petroleum), light arom
Concentration
N/A
EC/CAS
64742-48-9
Name of the chemical
Naphtha (petroleum), hydrotreated heavy
Concentration
N/A
EC/CAS
1314-13-2
Name of the chemical
Zinc oxide; C.I. 77947
Concentration
N/A
EC/CAS
7440-02-0
Name of the chemical
Nickel
Concentration
N/A
EC/CAS
106-97-8
Name of the chemical
n-Butan, enthält 0,1% Butadien
Concentration
N/A
General Information
Revision date
2016-08-05
Product name
Stainless Steel Spray
Icons in SDS
Company Information
company name
WEICON Inc
e-mail address of the competent person responsible for the Safety Data Sheet
info@weicon.ca, msds@weicon.de
GHS Information
Signal word
Danger
Section 2
SECTION 2: Hazards identification
29 CFR 1910.1200) identification Emergency overview Appearance: Physical state at 68 °F and 101.3 kPa: liquid Form: Aerosol Odor: No data available
2.1 Classification of the substance or mixture
Aerosol - Category 1; Eye Irritation - Category 2A; Sensitization - skin - Category 1; Carcinogenicity - Category 2; Specific Target Organ Toxicity (Single Exposure) - Category 3; Aquatic toxicity - chronic - Category 3;
Signal word
Danger
Hazard statements
Extremely flammable aerosol. Pressurised container: May burst if heated. May cause an allergic skin reaction. Causes serious eye irritation. May cause drowsiness or dizziness. Suspected of causing cancer. Harmful to aquatic life with long lasting effects. en-US Date of print: Aug/11/2016 Stainless Steel Spray Material number 111000 Page: 2 of 14
Precautionary statements
Keep out of reach of children Obtain special instructions before use. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Avoid breathing dust/fume/gas/mist/vapors/spray. Wash hands and face thoroughly after handling. Use only outdoors or in a well-ventilated area. Contaminated work clothing should not be allowed out of the workplace. Avoid release to the environment. Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN: Wash with plenty of water/soap. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF exposed or concerned: Get medical advice/attention. Call a POISON CENTER/doctor if you feel unwell. Specific treatment (see ' First aid ' on this label). If skin irritation or rash occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Wash contaminated clothing before reuse. Store in a well-ventilated place. Keep container tightly closed. Store locked up. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. Dispose of contents/container to hazardous or special waste collection point. Regulatory status This material is considered hazardous by the U.S. OSHA Hazard Communication Standard (29 CFR 1910.1200) and SIMDUT in Canada.
2.3 Other hazards
Exposure to temperatures exceeding 122 °F will increase pressure: resulting in danger of bursting or explosion. Potentially explosive mixtures may form if adequate ventilation is not provided. Inhaling can lead to irritations of the respiratory tract and mucous membrane. Higher doses may have a narcotic effect. Danger of metabolic acidosis. Causes mild skin irritation. Repeated exposure may cause skin dryness or cracking. see section 11: Toxicological information en-US Date of print: Aug/11/2016 Stainless Steel Spray Material number 111000 Page: 3 of 14 3. 3. Composition