General Information
Revision date
2019-12-06
Product name
Urethan 80 Putty Hardener
1.2.1 Relevant identified uses
2-K Urethan - Resin
Manufacturer Name
WEICON GmbH & Co. KG
Emergency telephone
UK, UAE, South Africa (24h) Tel
Icons in SDS
Company Information
company name
WEICON GmbH & Co. KG
e-mail address of the competent person responsible for the Safety Data Sheet
msds@weicon.de
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H317, H319, H332, H334, H335, H351, H373
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
CLP CLASSIFICATION
Hazard classes and Hazard ] Hazard classes and Hazard
Hazard statements
Classification procedure categories Acute Tox. 4 H332 Skin Irrit. 2 H315 Eye Irrit. 2 H319 Resp. Sens. 1 H334 Skin Sens. 1 H317 Carc. 2 H351 Classification procedure categories STOT SE 3 H335 STOT RE 2 H373 H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H332 Harmful if inhaled. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H335 May cause respiratory irritation. H351 Suspected of causing cancer. H373 May cause damage to organs through prolonged or repeated exposure. H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H332 Harmful if inhaled. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H335 May cause respiratory irritation. H351 Suspected of causing cancer. H373 May cause damage to organs through prolonged or repeated exposure.
2.2 Label elements
Labelling according to Regulation (EC) No 1272/2008 [CLP/GHS] GHS07 GHS08
Signal word
Danger
Precautionary statements
P102 Keep out of reach of children. P201 Obtain special instructions before use. P260 Do not breathe vapours/spray. P271 Use only outdoors or in a well-ventilated area. P272 Contaminated work clothing should not be allowed out of the workplace. P280 Wear protective gloves/eye protection. P284 [In case of inadequate ventilation] wear respiratory protection. P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305 + P351 + IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and P338 easy to do. Continue rinsing. P308 + P311 IF exposed or concerned: Call a POISON CENTER/doctor. P333 + P313 If skin irritation or rash occurs: Get medical advice/attention. P337 + P313 If eye irritation persists: Get medical advice/attention. P342 + P311 If experiencing respiratory symptoms: Call a POISON CENTER or doctor/physician. P403 + P233 Store in a well-ventilated place. Keep container tightly closed. P405 Store locked up. P501 Dispose of contents/container to hazardous or special waste collection point.
Hazardous Ingredients
4,4' Methylendiphenyldiisocyanat, Oligomere, 4,4'-Methylenediphenyl diisocyanate, oligomeric reaction products with a- hydro-w-hydroxypoly(oxy-1,2-ethanediyl)
Special rules for supplemental label elements for certain mixtures
Persons already sensitised to diisocyanates may develop allergic reactions when using this product. Persons suffering from asthma, eczema or skin problems should avoid contact, including dermal contact, with this product. This product should not be used under conditions of poor ventilation unless a protective mask with an appropriate gas filter (i.e. type A1according to standard EN 14387) is used. Contains isocyanates. May produce an allergic reaction.
Remarks
For industrial use only.
2.3 Other hazards
Information pertaining to special dangers for human and environment Harmful by inhalation. Danger of serious damage to health by prolonged exposure.
Results of PBT and vPvB assessment
The substances in the mixture do not meet the PBT/vPvB criteria according to REACH, annex XIII.