Note: Ingredients listed on restricted chemical lists
General Information
Revision date
2020-09-06
Product name
Mould Release Agent Spray
CAS No.
109-66-0
1.2.1 Relevant identified uses
Aerosol product
supplier name
WEICON GmbH & Co. KG
Icons in SDS
Company Information
company name
WEICON GmbH & Co. KG
e-mail address of the competent person responsible for the Safety Data Sheet
msds@weicon.de
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H222, H280, H336, H401
Hazard statements
Code
Statements
H222
Extremely flammable aerosol
Section 2
2.1 Classification of the substance or mixture
FLAMMABLE AEROSOLS - Category 1 GASES UNDER PRESSURE - Compressed gas SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE) (Narcotic effects) - Category 3 AQUATIC HAZARD (ACUTE) - Category 2
Signal word
Danger
Hazard statements
H222 - Extremely flammable aerosol. H280 - Contains gas under pressure; may explode if heated. H336 - May cause drowsiness or dizziness. H401 - Toxic to aquatic life.
Prevention
P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P211 - Do not spray on an open flame or other ignition source. P271 - Use only outdoors or in a well-ventilated area. P273 - Avoid release to the environment. P261 - Avoid breathing dust or mist. P251 - Do not pierce or burn, even after use.
Response
P304 + P312 - IF INHALED: Call a POISON CENTER or doctor if you feel unwell.
Storage
P405 - Store locked up. P410 + P412 - Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. P403 + P233 - Store in a well-ventilated place. Keep container tightly closed.
Disposal
P501 - Dispose of contents and container in accordance with all local, regional, national and international regulations.
Other hazards which do not result in classification
None known.
