Fast-Bond Assembly Adhesive (GB)

Hazard statements (CLP)

H317, H334, H351

Code

Statements

H317

May cause an allergic skin reaction

CLP CLASSIFICATION

Hazard classes and Hazard

Hazard statements

Classification procedure categories Resp. Sens. 1 H334 Skin Sens. 1 H317 Carc. 2 H351 H317 May cause an allergic skin reaction. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H351 Suspected of causing cancer. H317 May cause an allergic skin reaction. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H351 Suspected of causing cancer.

2.2 Label elements

Labelling according to Regulation (EC) No 1272/2008 [CLP/GHS] GHS08

Signal word

Danger

Precautionary statements

P102 Keep out of reach of children. P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P261 Avoid breathing dust/fume/gas/mist/vapours/spray. P272 Contaminated work clothing should not be allowed out of the workplace. P281 Use personal protective equipment as required. P285 In case of inadequate ventilation wear respiratory protection. P302 + P352 IF ON SKIN: Wash with plenty of soap and water. P304 + P341 IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. P308 + P313 IF exposed or concerned: Get medical advice/attention. P332 + P313 If skin irritation occurs: Get medical advice/attention. P342 + P311 If experiencing respiratory symptoms: Call a POISON CENTER or doctor/physician. P363 Wash contaminated clothing before reuse. P405 Store locked up. P501 Dispose of contents/container to hazardous or special waste collection point.

Hazardous Ingredients

polymethylenpolyphenylisocyanat ( - )

Special rules for supplemental label elements for certain mixtures

Persons already sensitised to diisocyanates may develop allergic reactions when using this product. Persons suffering from asthma, eczema or skin problems should avoid contact, including dermal contact, with this product. This product should not be used under conditions of poor ventilation unless a protective mask with an appropriate gas filter (i.e. type A1according to standard EN 14387) is used. Contains isocyanates. May produce an allergic reaction.

2.3 Other hazards

Information pertaining to special dangers for human and environment May cause sensitization by inhalation and skin contact.

Results of PBT and vPvB assessment

The substances in the mixture do not meet the PBT/vPvB criteria according to REACH, annex XIII.