LiquiSeal Metal Primer (B)

Weatherbond

Revision date : 2014-10-24

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS07 GHS08
Health risk rating 5
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

9016-87-9

Name of the chemical

4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)

Concentration

N/A

EC/CAS

101-68-8

Name of the chemical

4,4’-Methylenediphenyl diisocyanate

Concentration

N/A

EC/CAS

5873-54-1

Name of the chemical

2,4’-Methylenediphenyl diisocyanate

Concentration

N/A

General Information

Revision date

2014-10-24

Product name

LiquiSeal Metal Primer (B)

Product Synonyms

Interior and Exterior Waterproofing

Chemical name

Isocyanate

1.2.1 Relevant identified uses

Interior and exterior waterproofing

Icons in SDS

Company Information

company name

Weatherbond

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H315, H317, H320, H332, H334, H335

Hazard statements

Code

Statements

H315

Causes skin irritation

Section 2

OSHA HCS Classification

GHS08 Health hazard Resp. Sens. 1 H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. GHS07 Acute Tox. 4 H332 Harmful if inhaled. Skin Irrit. 2 H315 Causes skin irritation. Skin Sens. 1 H317 May cause an allergic skin reaction. STOT ST 3 H335 May cause respiratory irritation. Eye Irrit. 2B H320 Causes eye irritation.

Additional information

At temperatures up to 77ºF (25ºC), this product does not emit sufficient vapors to pose a respiratory hazard when used as directed. Above this temperature, concentrations may become hazardous in enclosed spaces. Ventilation using open windows, fans, or other means of creating airflow are typically sufficient engineering controls to maintain adequate ventilation at working temperatures.

2.2 Label elements

This product is classified and labeled according to the Globally Harmonized System (GHS).

Signal word

Danger

Hazardous Ingredients

diphenylmethanediisocyanate,isomeres and homologues 4,4'-methylenediphenyl diisocyanate o-(p-isocyanatobenzyl)phenyl isocyanate

Hazard statements

Harmful if inhaled. Causes skin and eye irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause an allergic skin reation. May cause respiratory irritation.

Precautionary statements

In case of inadequate ventilation wear respiratory protection. Avoid breathing dust/fume/gas/mist/vapours/spray. Wear protective gloves/protective clothing/eye protection/face protection. Wash thoroughly after handling. Use only outdoors or in a well-ventilated area. Contaminated work clothing should not be allowed out of the workplace. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Specific treatment (see on this label). IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. If skin irritation occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. IF ON SKIN: Wash with plenty of soap and water. IF INHALED: Call a POISON CENTER/doctor if you feel unwell. If experiencing respiratory symptoms: Call a POISON CENTER/doctor. Take off contaminated clothing and wash it before reuse. Store in a well-ventilated place. Keep container tightly closed. Dispose of contents/container in accordance with local/regional/national/international regulations. WHMIS-symbols: D2A – Very toxic material causing other toxic effects NFPA ratings (scale 0 - 4): 1 Health = 2 2 1 Fire = 1 Reactivity = 1 0

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.