Weartech WT-C276

Hazard statements (CLP)

H317, H332, H334, H341, H350i, H372, H400, H410

Code

Statements

H317

May cause an allergic skin reaction

SECTION 2: Hazards identification

2.1 Classification of the substance or mixture

The product has been classified according to the legislation in force.

Health hazards

Acute toxicity (Inhalation - dust Category 4 H332 and mist) Skin sensitizer Category 1 H317 Respiratory sensitizer Category 1 H334 Germ Cell Mutagenicity Category 2 H341 Carcinogenicity Category 1B H350i Specific Target Organ Toxicity - Category 1 H372 Repeated Exposure

Environmental hazards

Acute hazards to the aquatic Category 1 H400 Chronic hazards to the aquatic Category 1 H410

Contains

Nickel Cobalt and compounds (as Co)

Signal word

Danger

Hazard statements

H332: Harmful if inhaled. H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled. H317: May cause an allergic skin reaction. H341: Suspected of causing genetic defects. H350i: May cause cancer by inhalation. H372: Causes damage to organs respiratory tract through prolonged or repeated exposure. H410: Very toxic to aquatic life with long lasting effects.

Prevention

P201: Obtain special instructions before use. P202: Do not handle until all safety precautions have been read and understood. P260: Do not breathe dust/fume/gas/mist/vapors/spray. P270: Do not eat, drink or smoke when using this product. P273: Avoid release to the environment. P280: Wear protective gloves/protective clothing/eye protection/face protection. P284: [In case of inadequate ventilation] wear respiratory protection.

Response

P302+P352 IF ON SKIN Wash with plenty of soap and water P333+P313 If skin irritation or rash occurs Get medical advice/attention. P362+P364: Take off contaminated clothing and wash it before reuse. P304+P340 IF INHALED Remove person to fresh air and keep comfortable for breathing. P342+P311 If experiencing respiratory symptoms Call a POISON CENTER or doctor/ physician. P308+P313 IF exposed or concerned Get medical advice/attention P391: Collect spillage.

2.3 Other hazards

Electrical Shock can kill. If welding must be performed in damp locations or with wet clothing, on metal structures or when in cramped positions such as sitting, kneeling or lying, or if there is a high risk of unavoidable or accidental contact with work piece, use the following equipment: Semiautomatic DC Welder, DC Manual (Stick) Welder, or AC Welder with Reduced Voltage Control. Arc rays can injure eyes and burn skin. Welding arc and sparks can ignite combustibles and flammable materials. Overexposure to welding fumes and gases can be hazardous. Read and understand the manufacturer’s instructions, Safety Data Sheets and the precautionary labels before using this product. Refer to Section 8. Substance(s) formed under the conditions of use The welding fume produced from this welding electrode may contain the following constituent(s) and/or their complex metallic oxides as well as solid particles or other constituents from the consumables, base metal, or base metal coating not listed below. Chemical name Carbon dioxide Carbon monoxide Nitrogen dioxide Ozone CAS-No. 124-38-9 630-08-0 10102-44-0 10028-15-6