Note: Ingredients listed on restricted chemical lists
EC/CAS
231-111-4/7440-02-0
Name of the chemical
Nickel
Concentration
50-<100%
EC/CAS
231-157-5/7440-47-3
Name of the chemical
Chromium; chromic acid and its salts
Concentration
10-<20%
EC/CAS
231-105-1/7439-96-5
Name of the chemical
Manganese
Concentration
0,1-<1%
EC/CAS
231-158-0/7440-48-4
Name of the chemical
Cobalt, Metall (2020/217)
Concentration
0,1-<1%
EC/CAS
231-072-3/7429-90-5
Name of the chemical
Aluminium
Concentration
0,1-<1%
General Information
Version
2.0
Revision date
2021-08-09
Product name
Weartech WT-40
1.2.1 Relevant identified uses
PAW, Thermal Spray and Laser Clad
1.2.2. Uses advised against
Not known. Read this SDS before using this product
Emergency telephone
+1 (888) 609-1762, +1 (216) 383-8962, +1 (216) 383-8966, +1 (216) 383-8969
Icons in SDS
Company Information
company name
Weartech International, Inc
e-mail address of the competent person responsible for the Safety Data Sheet
sales@weartech.net, EHS@weartech.eu
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H317, H350i, H372, H400, H410
Hazard statements
Code
Statements
H317
May cause an allergic skin reaction
Section 2
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
The product has been classified according to the legislation in force.
Health hazards
Skin sensitizer Category 1 H317 Carcinogenicity Category 1B H350i Specific Target Organ Toxicity - Category 1 H372 Repeated Exposure
Environmental hazards
Acute hazards to the aquatic Category 1 H400 Chronic hazards to the aquatic Category 1 H410
Contains
Nickel Cobalt and compounds (as Co)
Signal word
Danger
Hazard statements
H317: May cause an allergic skin reaction. H350i: May cause cancer by inhalation. H372: Causes damage to organs respiratory tract through prolonged or repeated exposure. H410: Very toxic to aquatic life with long lasting effects.
Prevention
P201: Obtain special instructions before use. P202: Do not handle until all safety precautions have been read and understood. P260: Do not breathe dust/fume/gas/mist/vapors/spray. P270: Do not eat, drink or smoke when using this product. P273: Avoid release to the environment. P280: Wear protective gloves/protective clothing/eye protection/face protection.
Response
P302+P352 IF ON SKIN Wash with plenty of soap and water P333+P313 If skin irritation or rash occurs Get medical advice/attention. P362+P364: Take off contaminated clothing and wash it before reuse. P308+P313 IF exposed or concerned Get medical advice/attention P391: Collect spillage.
2.3 Other hazards
Electrical Shock can kill. If welding must be performed in damp locations or with wet clothing, on metal structures or when in cramped positions such as sitting, kneeling or lying, or if there is a high risk of unavoidable or accidental contact with work piece, use the following equipment: Semiautomatic DC Welder, DC Manual (Stick) Welder, or AC Welder with Reduced Voltage Control. Arc rays can injure eyes and burn skin. Welding arc and sparks can ignite combustibles and flammable materials. Overexposure to welding fumes and gases can be hazardous. Read and understand the manufacturer’s instructions, Safety Data Sheets and the precautionary labels before using this product. Refer to Section 8. Substance(s) formed under the conditions of use The welding fume produced from this welding electrode may contain the following constituent(s) and/or their complex metallic oxides as well as solid particles or other constituents from the consumables, base metal, or base metal coating not listed below. Chemical name Carbon dioxide Carbon monoxide Nitrogen dioxide Ozone CAS-No. 124-38-9 630-08-0 10102-44-0 10028-15-6
