Weartech WT-32

Hazard statements (CLP)

H302, H317, H319, H330, H334, H341, H350i, H361f, H372, H400, H410, H411

Code

Statements

H302

Harmful if swallowed

SECTION 2: Hazards identification

2.1 Classification of the substance or mixture

The product has been classified according to the legislation in force.

Health hazards

Acute toxicity (Oral) Category 4 H302 Acute toxicity (Inhalation - dust Category 2 H330 and mist) Serious eye irritation Category 2 H319 Skin sensitizer Category 1 H317 Respiratory sensitizer Category 1 H334 Germ Cell Mutagenicity Category 2 H341 Carcinogenicity Category 1B H350i Toxic to reproduction Category 2 H361f Specific Target Organ Toxicity - Category 1 H372 Repeated Exposure

Environmental hazards

Acute hazards to the aquatic Category 1 H400 Chronic hazards to the aquatic Category 2 H411

Contains

Cobalt and compounds (as Co) Nickel

Signal word

Danger

Hazard statements

H330: Fatal if inhaled. H302: Harmful if swallowed. H319: Causes serious eye irritation. H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled. H317: May cause an allergic skin reaction. H341: Suspected of causing genetic defects. H350i: May cause cancer by inhalation. H361f: Suspected of damaging fertility. H372: Causes damage to organs respiratory tract through prolonged or repeated exposure. H410: Very toxic to aquatic life with long lasting effects.

Prevention

P201: Obtain special instructions before use. P260: Do not breathe dust/fume/gas/mist/vapors/spray. P280: Wear protective gloves/protective clothing/eye protection/face protection.

Response

P304+P340 IF INHALED Remove person to fresh air and keep comfortable for breathing. P310: Immediately call a POISON CENTER or doctor/ physician. P342: If experiencing respiratory symptoms: P308+P313 IF exposed or concerned Get medical advice/attention

Storage

P403+P233: Store in a well-ventilated place. Keep container tightly closed.

2.3 Other hazards

Electrical Shock can kill. If welding must be performed in damp locations or with wet clothing, on metal structures or when in cramped positions such as sitting, kneeling or lying, or if there is a high risk of unavoidable or accidental contact with work piece, use the following equipment: Semiautomatic DC Welder, DC Manual (Stick) Welder, or AC Welder with Reduced Voltage Control. Arc rays can injure eyes and burn skin. Welding arc and sparks can ignite combustibles and flammable materials. Overexposure to welding fumes and gases can be hazardous. Read and understand the manufacturer’s instructions, Safety Data Sheets and the precautionary labels before using this product. Refer to Section 8. Substance(s) formed under the conditions of use The welding fume produced from this welding electrode may contain the following constituent(s) and/or their complex metallic oxides as well as solid particles or other constituents from the consumables, base metal, or base metal coating not listed below. Chemical name Carbon dioxide Carbon monoxide Nitrogen dioxide Ozone CAS-No. 124-38-9 630-08-0 10102-44-0 10028-15-6