Chemgon2.5, Chemgon5

SECTION 2: Hazards identification

WARNING STATEMENT CAUTION CONTACT WITH EYES AND SKIN MAY RESULT IN IRRITATION.

Principle Routes of Exposure

Routes of entry for solids and liquids include eye and skin contact, ingestion and inhalation. Routes of entry for gases. Include inhalation and eye contact. Skin contact may be a route of entry for liquefied gases. Acute Overexposure Effects: Contact with the eyes and skin may result in irritation. Ingestion of large amounts will result in diarrhea and weakness. Inhalation of the vapors or mist may result in respiratory irritation. Chronic Overexposure Effects: There are no other known chronic effects associated with this material. First Aid Procedures – Aggravated Medical Conditions: No data is available which addresses medical conditions that are generally recognized as being aggravated by exposure to this product. Please refer to the effects of overexposure section for effects observed in animals. SECTION III – EMERGENCY AND FIRST AID PROCEDURES Skin Contact: Wash affected areas with soap and water. Remove and launder contaminated clothing before reuse. If irritation develops, get medical attention. Eye Contact: Immediately rinse eyes with running water for 15 minutes. If irritation develops, get medical attention Ingestion: If swallowed, dilute with water and immediately induce vomiting never give fluids or induce vomiting if the victim is unconscious or have convulsions. Contact Chemtrec at (800) 424-9300 and seek immediate medical attention. Inhalation: Move to fresh air. Aid in breathing, if necessary and get immediate medical attention. Notes to Physicians: None known Aggravated Medical Conditions: No data is available which addresses medical conditions that are generally recognized as being aggravated by exposure to this product. Please refer to the effects of over exposure section for effects observed in animals. SECTION IV – FIRE FIGHTING MEASURES Typical Low/High Deg. Method Flash Point: N/A Auto ignition Temp: N/A Extinguishing Media: Use water foam, CO2 or dry chemical extinguishing media. Fire Fighting Procedures: Firefighters should be equipped with self-contained breathing apparatus and turn out gear Unusual Hazards: There are no known unusual fire or explosion hazards. BECOMES SLIPPERY WHEN WET. UNDER CERTAIN CONFINED CONDITIONS, A FINE DUST OF THIS MATERIAL IN AIR MAY CAUSE A DUST EXPLOSION IF IGNITED. SECTION V – ACCIDENTAL RELEASE MEASURES General: Caution: Spilled material is slippery. Vacuum spill (using HEPA filter equipped system) if possible to avoid generating airborne dust. Avoid adding water; the product will become slippery when wet. SECTION VI – STORAGE AND HANDLING General: Keep in tightly closed container in a cool place. Other Storage and Handling Data: Wet material becomes very slippery. Avoid breathing powder. Avoid skin and eye contact. SECTION VII – PERSONAL PROTECTION Clothing: Gloves, Coveralls, apron, boots as necessary to prevent skin contact. Butyl rubber gloves Eyes: Chemical goggles. Respiration: A NIOSH/MSHA approved dust respirator should be used as necessary. Ventilation: Use local exhaust to control to recommended. P.E.L. Explosion Proofing: None required. SECTION VIII – PHYSICAL PROPERTIES Color: Off White Form/Appearance: Granular powder Odor: Odorless Typical Low/High U.O.M. Bulk Density: .5-.7 G/CC pH: N/A Boiling Pt: N/A Freezing Pt: N/A Decomp. Temp: N/A SECTION IX – STABILITY AND REACTIVITY