Transpoxy Glascote DTM pack A

Wagon Paints Australia Pty Ltd

Revision date : 2024-05-16

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS07 GHS02
Health risk rating 4
Safety risk rating 2
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

25068-38-6

Name of the chemical

4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3-epoxypropane

Concentration

25-50%

Listed in

EC/CAS

14808-60-7

Name of the chemical

Silica, crystalline

Concentration

10-25%

EC/CAS

1330-20-7

Name of the chemical

Xylene

Concentration

≤2.5%

Listed in

EC/CAS

71-36-3

Name of the chemical

1-butanol

Concentration

≥1-≤2.5%

General Information

Revision date

2024-05-16

Product name

Transpoxy Glascote DTM pack A

1.2.2. Uses advised against

No further relevant information available

Emergency telephone

+613 9720 2719

Icons in SDS

GHS02 GHS07 M004 M009 T016

Company Information

company name

Wagon Paints Australia Pty Ltd

GHS Information

Signal word

Warning

Hazard Codes

Hazard statements (CLP)

H226, H315, H317, H319

Hazard statements

Code

Statements

H226

Flammable liquid and vapour

Section 2

SECTION 2: Hazards identification

Classification of the substance or mixture Flammable liquids – Category 3 H226 Flammable liquid and vapour Skin corrosion/irritation – Category 2 H315 Causes skin irritation Eye damage/irritation – Category 2A H319 Causes serious eye irritation Skin sensitisation – Category 1 H317 May cause an allergic skin reaction

2.2 Label elements

The product is classified and labelled according to the Globally Harmonised System (GHS).

Hazard pictograms

GHS02 GHS07

Hazardous Ingredients

reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight ≤ 700) (25-50 %) 1,6-Hexanediol diglycidylether (≥2.5-<10 %)

Hazard statements

H226 Flammable liquid and vapour. H315 Causes skin irritation. (Contd. on page 2) AU (Contd. of page 1) H319 Causes serious eye irritation. H317 May cause an allergic skin reaction.

Precautionary statements

P210 Keep away from heat/sparks/open flames/hot surfaces. No smoking. P233 Keep container tightly closed. P240 Ground/bond container and receiving equipment. P241 Use explosion-proof electrical/ventilating/lighting equipment. P261 Avoid breathing dust/fume/gas/mist/vapours/spray. P280 Wear protective gloves/protective clothing/eye protection/face protection. P303+P361+P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P403+P235 Store in a well-ventilated place. Keep cool. P501 Dispose of contents/container in accordance with local/regional/national/ international regulations.

PBT Substances

Not applicable

vPvB Substances

Not applicable *

2.1 Classification of the substance or mixture

Flammable liquids – Category 3 H226 Flammable liquid and vapour. Skin corrosion/irritation – Category 2 H315 Causes skin irritation. Eye damage/irritation – Category 2A H319 Causes serious eye irritation. Skin sensitisation – Category 1 H317 May cause an allergic skin reaction.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.