Rust Aid Rust Converter Aerosol

SECTION 2: Hazards identification

OSHA Flammable Aerosols, Category 1 Gas Under Pressure, Liquefied gas Skin Corrosion/Irritation, Category 1A Serious Eye Damage/Eye Irritation, Category 2 Specific Target Organ Toxicity (single exposure), Category 3 Simple Asphyxiant

Signal word

Danger

Hazard statements

H222: Extremely flammable aerosol. H280: Containers gas under pressure; may explode if heated. H314: Causes severe skin burns and eye damage. H319: Causes serious eye irritation. H336: May cause drowsiness or dizziness.

Precautionary statements

P210: Keep away from heat/sparks/open flames/hot surfaces. - No smoking. P211: Do not spray on an open flame or any other ignition source. P251 Pressurized container Do not pierce or burn, even after use P260: Do not breathe gas/mist/vapors/spray. P264: Wash hands thoroughly after handling. P271: Use only outdoors or in a well-ventilated area. P280: Wear protective gloves/protective clothing/eye protection/face protection.

Response

P301+330+331 IF SWALLOWED Rinse mouth. Do NOT induce vomiting P303+361+353 IF ON SKIN (or hair) Remove/take off immediately all contaminated clothing. Rinse skin with water/shower. P304+340 IF INHALED Remove victim to fresh air and keep at rest in a position comfortable for breathing. P305+351+338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310: Immediately call a POISON CENTER or doctor/physician. P321: Specific treatment see label. P337+313: If eye irritation persists, get medical advice/attention. P363: Wash contaminated clothing before reuse.

Storage

P403+233: Store container tightly closed in well-ventilated place. P405: Store locked up. P410+403: Protect from sunlight and store in well-ventilated place. P412: Do not expose to temperatures exceeding 50 ºC/122 ºF. P501: Dispose of contents/container according to local, state and federal regulations. Flammability Instability Hazard Rating System: HEALTH * 1 4 FLAMMABILITY 4 1 0 PHYSICAL 0 Health PPE X HMIS: NFPA: Special Hazard

Potential health effects

SKIN CONTACT: (Acute and Chronic): Moderately irritating to the skin. Prolonged or repeated contact can result in defatting, drying, and cracking of the skin which may result in skin irritation, inflammation, and dermatitis (rash). EYE CONTACT: May cause moderate to severe irritation. Symptoms may include: eye irritation, burning sensation, pain, watering, and/or change of vision. INHALATION: High concentrations may lead to central nervous system (CNS) effects (drowsiness, dizziness, nausea, headaches, uncoordinated or strange behavior, paralysis and loss of consciousness and even death) Other symptoms might include nasal discharge, hoarseness, coughing, chest pain, and breathing difficulty. High vapor concentrations are irritating to the eyes, nose, throat, and lungs. INGESTION: Product may be harmful or fatal if swallowed. Pulmonary aspiration hazard. After ingestion, may enter lungs and produce damage. May produce central nervous system effects, which may include dizziness, loss of balance and coordination, nausea, headache, unconsciousness, coma and even death. Reports have associated repeated and prolonged overexposure to solvents with neurological and other physiological damage. Intentional misuse by deliberately concentrating and inhaling solvents may be harmful or fatal. TARGET ORGANS / SYSTEMS: eye, skin, respiratory system, central nervous system, blood, kidneys, liver

Principle Routes of Exposure

inhalation, skin contact, ingestion Medical Conditions Generally May adversely affect people with acute or chronic disease of the: skin, eye, lung Aggravated By Exposure: (asthma-like conditions), central nervous system