Axiom Uniseal Part A

Visqueen

Revision date : 2023-10-27

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS02 GHS08
Health risk rating 5
Safety risk rating 2
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

905-562-9/9016-87-9

Name of the chemical

4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)

Concentration

14-15

EC/CAS

202-966-0/101-68-8

Name of the chemical

4,4’-Methylenediphenyl diisocyanate

Concentration

0.4-0

General Information

Revision date

2023-10-27

Product name

Axiom Uniseal Part A

1.2.1 Relevant identified uses

Industrial/Professional use spec

Icons in SDS

GHS02 GHS08 M009 M010 M017 T021

Company Information

company name

Visqueen

e-mail address of the competent person responsible for the Safety Data Sheet

enquiries@visqueen.com

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H226, H315, H319, H334, H373

Hazard statements

Code

Statements

H226

Flammable liquid and vapour

Section 2

SECTION 2: Hazards identification

Hazard statements

see section 16 : H226 - Flammable liquid and vapour H315 - Causes skin irritation H319 - Causes serious eye irritation H334 - May cause allergy or asthma symptoms or breathing difficulties if inhaled. H373 - May cause damage to organs through prolonged or repeated exposure

Adverse physicochemical, human health and environmental effects

No additional information available

2.2 Label elements

Labelling

Hazard pictograms

GHS02 GHS08

Signal word

Danger

Contains

Isocyanic acid, polymethylenepolyphenylene ester; Reaction mass of ethylbenzene and m- xylene and p-xylene; 4,4'- methylenediphenyl diisocyanate; diphenylmethane-4,4'- diisocyanate

Precautionary statements

P260 - Do not breathe vapours P280 - Wear protective gloves, face protection, eye protection P302+P352 - IF ON SKIN: Wash with plenty of water. P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P304+P340 - IF INHALED: Remove person to fresh air and keep comfortable for breathing. P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P271 - Use only outdoors or in a well-ventilated area. P501 - Dispose of contents to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.

Supplemental label elements

EUH204 - Contains isocyanates. May produce an allergic reaction

Additional information

Persons already sensitised to diisocyanates may develop allergic reactions when using this product. Persons suffering from asthma, eczema or skin problems should avoid contact, including dermal contact, with this product. As from 24 August 2023 adequate training is required before industrial or professional use.

2.3 Other hazards

Contains no PBT/vPvB substances ≥ 0.1% assessed in accordance with REACH Annex XIII The mixture does not contain substance(s) included in the list established in accordance with Article 59(1) of REACH for having endocrine disrupting properties, or is not identified as having endocrine disrupting properties in accordance with the criteria set out in Commission Delegated Regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at a concentration equal to or greater than 0,1 %

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.