Note: Ingredients listed on restricted chemical lists
EC/CAS
64742-01-4
Name of the chemical
Residual oils (petroleum), solvent-refined; Base oil — unspecified (A complex combination of hydrocarbons obtained as the solvent insoluble fraction from solvent refining of a residuum using a polar organic solvent such as phenol or furfural. It consists of hydrocarbons having carbon numbers predominantly greater than C25 and boiling above approximately 400 °C.)
Concentration
40.00-70.00
EC/CAS
68649-42-3
Name of the chemical
Phosphorodithioic acid, O,O-di-C1-14-alkyl esters, zinc salts
Concentration
0.50-1.50
EC/CAS
64742-54-7
Name of the chemical
Distillates (petroleum), hydrotreated heavy paraffinic; Base oil — unspecified (A complex combination of hydrocarbons obtained by treating a petroleum fraction with hydrogen in the presence of a catalyst. It consists of hydrocarbons having carbon numbers predominantly in the range of C20 through C50 and produces a finished oil of at least 19 10-6 m2.s-1 at 40 °C. It contains a relatively large proportion of saturated hydrocarbons.)
Concentration
5.00-10.00
EC/CAS
64742-55-8
Name of the chemical
Distillates (petroleum), hydrotreated light paraffinic
Concentration
5.00-10.00
General Information
Product name
New Holland Ambra Mastergold SSL SAE 0W-40
supplier name
Viscosity Oil Company
Manufacturer Name
Viscosity Oil Company
Emergency telephone
1-800-424-9300 (Within Continental U.S.); Chemtrec 703-527-3887
Icons in SDS
Company Information
company name
Viscosity Oil Company
Section 2
2.1 Classification of the substance or mixture
WHMIS information: This product is not a WHMIS controlled product in Canada. OSHA: This material is not classified as hazardous under OSHA regulations (29 CFR Part 1910.1200). Emergency Overview Clear bright liquid. Petroleum odour. Fumes from heated product or mists may irritate respiratory tract. May cause mild eye irritation. May cause mild skin irritation. Toxic fumes are released in fire situation.
Potential health effects
Signs and symptoms of short-term (acute) exposure Inhalation Fumes from heated product or mists, may irritate respiratory tract. Skin : May cause mild skin irritation. The skin irritation hazard is based on evaluation of data for / testing of similar materials. Hydrocarbons injected into the skin under pressure can cause severe injury. Symptoms from pressure injection may include inflammation, swelling and severe, permanent tissue damage. Even though initial symptoms from high pressure injection may be minimal or absent, early surgical treatment within the first few hours may significantly reduce the ultimate extent of injury. Exposure to hot material may cause thermal burns. Eyes : May cause mild, short-lasting discomfort to eyes, based on testing of similar products. Ingestion : May have laxative effects. May cause nausea, vomiting, and diarrhea. Effects of long-term (chronic) exposure Oils can block the skin pores causing an acne-like disorder. Overexposure to sprays or mists may cause chemical pneumonitis (inflammation of lung tissue). Carcinogenic status : See TOXICOLOGICAL INFORMATION, Section 11. Additional health hazards : See TOXICOLOGICAL INFORMATION, Section 11.
Environmental effects
See ECOLOGICAL INFORMATION, Section 12.