SKIN: Remove contaminated clothing. Wash immediately with plenty of water. If irritation persists, get medical advice/attention. Wash

SECTION 2: Hazards identification

Hazard labelling pursuant to EC Regulation 1272/2008 (CLP) and subsequent amendments and supplements. HAZARDS CAUSED BY EXPOSURE IN THE EVENT OF FIRE Use a type P filtering facemask (see standard EN 149) or equivalent device, whose class (1, 2 or 3) and effective need, must be defined Information not relevant. 1. Regulation (EU)

2.1 Classification of the substance or mixture

in the presence of a source of ignition, it can create explosive mixtures with air. Fires may start or get worse by leakage of the solid product ENVIRONMENTAL EXPOSURE CONTROLS. contaminate soil or vegetation. 3. Regulation (EU) 790/2009 (I Atp. CLP) of the European Parliament SECTION 15. Regulatory information. from the container, when it reaches high temperatures or through contact with sources of ignition. The emissions generated by manufacturing processes, including those generated by ventilation equipment, should be checked to ensure 4. Regulation (EU)

2.2 Label elements

9.1. Information on basic physical and chemical properties. water used for extinction and the remains of the fire according to applicable regulations. Information not available. SPECIAL PROTECTIVE EQUIPMENT FOR FIRE-FIGHTERS Appearance Restrictions relating to the product or contained substances pursuant to Annex XVII to EC Regulation

Hazard pictograms

Normal fire fighting clothing i.e. fire kit (BS EN 469), gloves (BS EN 659) and boots (HO specification A29 and A30) in combination with Colour None. - Handling Chemical Safety -- white self-contained open circuit positive pressure compressed air breathing apparatus (BS EN 137). Odour Information not available. - INRS - Fiche Toxicologique (toxicological sheet) odourless

Signal word

Odour threshold. Substances in Candidate List (Art. 59 REACH). - Patty - Industrial Hygiene and Toxicology -- Not available. 12.4. Mobility in soil. pH. None. - N.I. Sax - Dangerous properties of Industrial Materials-7, 1989 Edition 5-8 Substances subject to authorisarion (Annex XIV REACH). -- SECTION 6. Accidental release measures.

Hazard statements

Melting point / freezing point. Information not available. - ECHA website -- > 1610 °C. Initial boiling point. None. Not available. 6.1. Personal precautions, protective equipment and emergency procedures.

Precautionary statements

Boiling range. Substances subject to exportation reporting pursuant to (EC) Reg. 649/2012: -- Not available.

Results of PBT and vPvB assessment

If there are no contraindications, spray powder with water to prevent the formation of dust. Avoid breathing vapours/mists/gases. None. Flash point. Note for users: Not available. Wear suitable protective equipment (including personal protective equipment referred to under Section 8 of the safety data sheet) to prevent Evaporation rate This product is not subject to hazard labeling pursuant to EC Regulation

2.3 Other hazards

Lower inflammability limit. Not available.

Other hazards

This document must not be regarded as a guarantee on any specific product property. Upper inflammability limit. Not available. 6.2. Environmental precautions. Substances subject to the Stockholm Convention: The use of this product is not subject to our direct control; therefore, users must, under their own responsibility, comply with the current health Lower explosive limit. Not available. On the basis of available data, the product does not contain any PBT or vPvB in percentage greater than 0,1%. Information not available. and safety laws and regulations. The producer is relieved from any liability arising from improper uses. On the basis of available data, the product does not contain any PBT or vPvB in percentage greater than 0,1%. The product must not penetrate into the sewer system or come into contact with surface water or ground water. None. Upper explosive limit. Provide appointed staff with adequate training on how to use chemical products. Not available. Vapour pressure. Not available. 6.3. Methods and material for containment and cleaning up. Healthcare controls. Vapour density Not available. Information not available. Use spark-proof mechanical equipment to collect the leaked product and place it in containers for recovery or disposal. If there are no Relative density. 2,500 Kg/l contraindications, use jets of water to eliminate product residues. Solubility insoluble in water Make sure the leakage site is well aired. Check incompatibility for container material in section 7. Contaminated material should be disposed Partition coefficient: n-octanol/water Not available. of in compliance with the provisions set forth in point 13. EPY 9.1.7 - SDS 1003