Note: Ingredients listed on restricted chemical lists
EC/CAS
237-158-7/13674-84-5
Name of the chemical
Tris(2-chloro-1-methylethyl) phosphate
Concentration
18<=C<19,5
EC/CAS
202-966-0/101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
28,5<=C<30
EC/CAS
270-705-8/68476-86-8
Name of the chemical
Petroleum gases, liquefied, sweetened
Concentration
7<=C<8
General Information
Revision date
2011-07-14
Product name
HYGRO-FOAM RE1180
Product name
HYGRO-FOAM RE1180
Identification on the label/Trade name
MECCANOCAR ITALIA S.R.L
1.2.1 Relevant identified uses
preparation
Emergency telephone
+390587609433
Icons in SDS
Company Information
company name
Via San Francesco,22
Section 2
SECTION 2: Hazards identification
1999/45/EC 2.1 Substance/Preparation Classification This product is dangerous under 67/548/EEC and 1999/45/EC directives and subsequent amendments. Therefore, this product requires a safety data sheet according to the Regulation (EC)
Hazard pictograms
F+-Xn
R-phrase(s)
12-20/22-36/37/38-40-42/43-48/20 2.2 Danger Identification Because of its chemical-physical features, this product is graded as highly flammable (flash-point below 0 °C and boiling point / boiling start equal to 35° C or lower). HARMFUL BY INHALATION AND IF SWALLOWED. IRRITATING TO EYES, RESPIRATORY SYSTEM AND SKIN. LIMITED EVIDENCE OF A CARCINOGENIC EFFECT. MAY CAUSE SENSITIZATION BY INHALATION AND SKIN CONTACT. HARMFUL: DANGER OF SERIOUS DAMAGE TO HEALTH BY PROLONGED EXPOSURE THROUGH INHALATION. This product contains isocyanates. Producer's specifications are as follows: Ready-to-use products containing isocyanates may irritate mucosas, particularly those of the respiratory system, and may give rise to hypersensitivity reactions. Vapour or aerosol inhalation may lead to sensitization. Please take all the measures used for all solvent-containing products while manipulating isocyanate-containing products. Avoid vapour and aerosol inhalation. People with allergic or asthmatic precedents or subject to respiratory disorders should not handle products containing isocyanates.
