SAS25 SATIN BLACK PAINT 500ML

Hazard statements (CLP)

H222, H229, H319, H336

Code

Statements

H222

Extremely flammable aerosol

SECTION 2: Hazards identification

Classification according to GHS

CLP (SI 2019 720 as amended) Aerosol, Category 1 H222;H229 Serious eye damage/eye irritation, Category 2 H319 Specific target organ toxicity – Single exposure, Category 3, Narcosis H336 Full text of H- and EUH-statements: see section 16

Adverse physicochemical, human health and environmental effects

Pressurised container: May burst if heated. Extremely flammable aerosol. May cause drowsiness or dizziness. Causes serious eye irritation.

2.2 Label elements

Labelling according to GB CLP (SI 2019:720 as amended)

Hazard pictograms

GB CLP) GHS02 GHS07

Signal word

GB CLP) : Danger

Contains

Acetone

Hazard statements

GB CLP) : H222 - Extremely flammable aerosol. H229 - Pressurised container: May burst if heated. H319 - Causes serious eye irritation. H336 - May cause drowsiness or dizziness.

Precautionary statements

GB CLP) : P101 - If medical advice is needed, have product container or label at hand. P102 - Keep out of reach of children. P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P211 - Do not spray on an open flame or other ignition source. P251 - Do not pierce or burn, even after use. P261 - Avoid breathing vapours, spray. P271 - Use only outdoors or in a well-ventilated area. P280 - Wear protective gloves, eye protection. P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+P313 - If eye irritation persists: Get medical advice, attention. P410+P412 - Protect from sunlight. Do not expose to temperatures exceeding 50 °C, 122 °F. P501 - Dispose of contents/ container in accordance with local regulations.

Supplemental label elements

GB CLP) : EUH066 - Repeated exposure may cause skin dryness or cracking. Child-resistant fastening : Not applicable Tactile warning : Not applicable

2.3 Other hazards

Component Substance(s) not meeting the PBT criteria of UK Xylene (mixture of isomers) (1330-20-7), 2-methoxy-1-methylethyl acetate (108-65-6), REACH regulation, in accordance with Annex XIII Solvent naphtha (petroleum), light arom. (64742-95-6), 2-butoxyethanol (111-76-2), Ethylbenzene (100-41-4), Methyl methacrylate (80-62-6)(¹), 2-methoxy-1-methylethyl acetate (108-65-6), Acetone (67-64-1), Petroleum gases, liquefied (Contains < 0.1% 1,3- butadiene) (68476-85-7), cumene (98-82-8)(¹) Substance(s) not meeting the vPvB criteria of UK Xylene (mixture of isomers) (1330-20-7), 2-methoxy-1-methylethyl acetate (108-65-6), REACH regulation, in accordance with Annex XIII Solvent naphtha (petroleum), light arom. (64742-95-6), 2-butoxyethanol (111-76-2), Ethylbenzene (100-41-4), Methyl methacrylate (80-62-6)(¹), 2-methoxy-1-methylethyl acetate (108-65-6), Acetone (67-64-1), Petroleum gases, liquefied (Contains < 0.1% 1,3- butadiene) (68476-85-7), cumene (98-82-8)(¹) Component Substance(s) not included in the list established in Acetone(67-64-1), Petroleum gases, liquefied (Contains < 0.1% 1,3-butadiene)(68476-85- accordance with Article 59(1) of UK REACH for 7), Xylene (mixture of isomers)(1330-20-7), 2-butoxyethanol(111-76-2), 2-methoxy-1- having endocrine disrupting properties, or is not methylethyl acetate(108-65-6), Solvent naphtha (petroleum), light arom.(64742-95-6), identified as having endocrine disrupting properties in Ethylbenzene(100-41-4), 2-methoxy-1-methylethyl acetate(108-65-6), Methyl accordance with the criteria set out in GB BPR and methacrylate(80-62-6)(¹), cumene(98-82-8)(¹) GB PPP