SAS24 ZINC SPRAY 500ML

Hazard statements (CLP)

H222, H229, H319, H336, H411

Code

Statements

H222

Extremely flammable aerosol

SECTION 2: Hazards identification

Classification according to GHS

CLP (SI 2019 720 as amended) Aerosol, Category 1 H222;H229 Serious eye damage/eye irritation, Category 2 H319 Specific target organ toxicity – Single exposure, Category 3, Narcosis H336 Hazardous to the aquatic environment – Chronic Hazard, Category 2 H411 Full text of H- and EUH-statements: see section 16

Adverse physicochemical, human health and environmental effects

Pressurised container: May burst if heated. Extremely flammable aerosol. May cause drowsiness or dizziness. Causes serious eye irritation. Toxic to aquatic life with long lasting effects.

2.2 Label elements

Labelling according to GB CLP (SI 2019:720 as amended)

Hazard pictograms

GB CLP) GHS02 GHS07 GHS09

Signal word

GB CLP) : Danger

Contains

n-butyl acetate; Acetone; 1-methoxypropan-2-ol

Hazard statements

GB CLP) : H222 - Extremely flammable aerosol. H229 - Pressurised container: May burst if heated. H319 - Causes serious eye irritation. H336 - May cause drowsiness or dizziness. H411 - Toxic to aquatic life with long lasting effects.

Precautionary statements

GB CLP) : P101 - If medical advice is needed, have product container or label at hand. P102 - Keep out of reach of children. P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P211 - Do not spray on an open flame or other ignition source. P251 - Do not pierce or burn, even after use. P261 - Avoid breathing vapours, spray. P271 - Use only outdoors or in a well-ventilated area. P280 - Wear protective gloves, eye protection. P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+P313 - If eye irritation persists: Get medical advice, attention. P410+P412 - Protect from sunlight. Do not expose to temperatures exceeding 50 °C, 122 °F. P501 - Dispose of contents/ container in accordance with local regulations.

Supplemental label elements

GB CLP) : EUH066 - Repeated exposure may cause skin dryness or cracking. Child-resistant fastening : Not applicable Tactile warning : Not applicable

2.3 Other hazards

Component Substance(s) not meeting the PBT criteria of UK Xylene (mixture of isomers) (1330-20-7), Zinc powder - zinc dust (stabilised) (7440-66-6), REACH regulation, in accordance with Annex XIII n-butyl acetate (123-86-4), Acetone (67-64-1), 1-methoxypropan-2-ol (107-98-2), Ethylbenzene (100-41-4), Petroleum gases, liquefied (Contains < 0.1% 1,3-butadiene) (68476-85-7), Methyl methacrylate (80-62-6)(¹) Substance(s) not meeting the vPvB criteria of UK Xylene (mixture of isomers) (1330-20-7), Zinc powder - zinc dust (stabilised) (7440-66-6), REACH regulation, in accordance with Annex XIII n-butyl acetate (123-86-4), Acetone (67-64-1), 1-methoxypropan-2-ol (107-98-2), Ethylbenzene (100-41-4), Petroleum gases, liquefied (Contains < 0.1% 1,3-butadiene) (68476-85-7), Methyl methacrylate (80-62-6)(¹) Component Substance(s) not included in the list established in Petroleum gases, liquefied (Contains < 0.1% 1,3-butadiene)(68476-85-7), Acetone(67-64- accordance with Article 59(1) of UK REACH for 1), Zinc powder - zinc dust (stabilised)(7440-66-6), Xylene (mixture of isomers)(1330-20- having endocrine disrupting properties, or is not 7), n-butyl acetate(123-86-4), 1-methoxypropan-2-ol(107-98-2), Ethylbenzene(100-41-4), identified as having endocrine disrupting properties in Methyl methacrylate(80-62-6)(¹) accordance with the criteria set out in GB BPR and GB PPP